Lost Every Car Key in San Bernardino? We Make New Ones at the Car

What to expect in San Bernardino

Getting the cuts right is where all-keys-lost work differs most from ordinary key copying, and there's a standard order of attack. Our first choice is the factory key code. Many automakers will release it against the VIN once ownership is established, and a code-cut key comes out at factory depths instead of copying wear from a used key. When the code isn't available, because the car is older, a previous owner changed the locks, or the manufacturer simply doesn't release it, we decode. A Lishi-style pick and decoder reads each wafer in the door cylinder while gently turning it, and the readings translate into cut depths. Door locks often hold only some of the positions the full key needs, so the missing cuts get filled in by progression: cutting a test key, trying it, and narrowing the options. On some vehicles the trunk, glovebox or ignition cylinder fills the gaps instead. Every method ends the same way in San Bernardino, with a blade that turns the driver's door smoothly before any programming begins.

Work included on a typical visit

• All-keys-lost transponder keys. Many sedans and pickups from the 2000s and 2010s still use a plain turned key with a transponder inside. Losing all of them is fixable on site: code or decode for the blade, then an all-keys-lost routine that may include a timed security wait. We usually make two keys so you're never back at zero.
• Erasing lost keys from the immobilizer. A found key carrying your car's chip is a theft risk until it's removed from memory. Most all-keys-lost procedures wipe the old list automatically. When you still have one key but lost another, we do it deliberately, erasing everything and re-adding only the keys present. You'll see the key count on our tool before and after.
• Re-pairing remotes and remote start. Aftermarket remote-start and alarm systems have their own memory, independent of the factory key list. If the lost ring held one of those remotes, the system could still disarm and start the car. We locate the control module under the dash, clear its transmitter memory, and pair only the remotes you still have.
• Rekeying locks after stolen keys. Rekeying the car's mechanical locks is optional for a key dropped on a hiking trail and wise for keys taken in a break-in. We decode, re-pin or re-wafer the cylinders to fresh cuts, and test every lock afterward. Some vehicles need replacement cylinders instead of a rekey, and we quote that before starting.
• Dealer-only vehicles: what we can still do. Dealer-only doesn't always mean dealer for everything. Once the dealer produces the key, remotes, aftermarket alarms or a separate mechanical key for a tonneau cover or toolbox may still need attention. We can help with those follow-up steps, and with entry if you're locked out while the new key is on order.

What's different about San Bernardino

Apartment parking adds two wrinkles to lost car keys in San Bernardino: gated garages and assigned spaces with little room to work. Let us know how the gate works or meet us at the entrance, and tell the leasing office a service van will be on site. If your unit key was on the same ring, ask management about rekeying the apartment as well.

Commuters lose keys in transit: on a train seat, in a gym bag at the office, at a park-and-ride along University Parkway. The car is usually left in a lot that empties out at night. If you're stuck at a commuter lot in San Bernardino, call while it's still light if you can. We'll originate the key at the car, erase the lost one, and get you home without a tow or a rideshare.

Students lose keys on campus, at the gym and in shared apartments, and the car is often registered to a parent somewhere else. That's fine. We need the student's photo ID, the registration or a clear photo of it, and a quick call with the registered owner. The older economy cars common among students in San Bernardino are usually straightforward all-keys-lost jobs.

Situations this covers

Imagine a weekend picnic at Seccombe Lake Park. Your key ring slips out of a pocket somewhere in the grass, and the spare is not in the car or at home. Your 2015 Honda Accord is stuck in the lot. We would meet you at the Accord, check your license, registration and VIN plate, decode the door lock, cut a new key and program it. Then we would delete the missing key from the immobilizer, so a stranger who finds it can't start the car.

• Imagine you notice the car key is missing at 11:45 p.m. on a Saturday, after we've closed for the night. The car is safe in your driveway. In that case, leave a message or call Sunday from 6:30 a.m., keep the paperwork handy, and avoid buying a random fob online in the meantime. Most all-keys-lost jobs can wait a day without harm.
• Picture a late-model Mercedes-Benz SUV parked at a gym near Perris Hill Park, its only key lost somewhere in the locker room. Once you read us the VIN, we'd explain on the phone that this generation's keys come through the dealer. What we can still do is open the car so you get your belongings, and talk through how the tow operator should move it without damage.
• Picture a used pickup bought from a private seller two weeks ago. It came with one key, that key is now gone, and the title transfer hasn't posted at the DMV yet. The signed title and bill of sale in your name are enough for us. We'd decode the door lock, cut and program two keys, and suggest keeping one of them at home.

From your call to the finished job

1. Call with the vehicle details. Not sure of the model year? Read us the license plate, or the VIN through the windshield. Describe the key: plain blade, flip key, remote head or push-button fob. If you can't reach the car right now, tell us that too, so we schedule the visit for when you can meet us there.
2. Verify ownership. Verification isn't a formality on an all-keys-lost job, because a new key effectively hands over the car. We look for your name on the registration, title or loan documents and match it to your ID, or confirm authorization from the owner, an employer, or a private seller's signed title.
3. Get the cuts. A code from the automaker isn't trusted blindly. Locks get swapped after break-ins and repairs, so we compare the code against what the door cylinder actually holds. If they disagree, the cylinder wins, because the key has to match the hardware on your car rather than the paperwork.
4. Cut and test the blade. The key is cut on a computerized machine in the van, whether it's a standard edge-cut blade or a laser-cut high-security profile. Before any programming, we turn it in the driver's door, and in the ignition on turn-key cars, to confirm smooth operation without forcing anything.
5. Program new keys and erase the old. Most vehicles accept two or more keys during one programming session, which makes it the moment to add a spare. Many Ford systems expect at least two keys in an all-keys-lost reset. Any key you want working afterward has to be present now, since the erase covers everything outside the session.
6. Test everything and hand off. The last step is a full functional check with you watching. Lock and unlock from a distance, start the engine several times, try the emergency blade in the door. Then we talk through rekeying options if the lost keys were stolen, and where to keep the spare.

Pricing factors

• Key type. Smart fobs and transponder keys aren't priced alike because the hardware isn't alike. A push-button fob contains a transmitter, a backup chip and a hidden blade, while a basic chip key is mostly plastic around a small transponder. Your VIN tells us which one the car requires, and the quote follows.
• How the cuts are obtained. A released factory code is the quickest way to a blade. Decoding the door lock adds time, and a lock that holds only part of the cuts adds progression work on top. Removing a cylinder to read it on the bench is the slowest route, and we'll say which one applies before we begin.
• Programming route. Newer vehicles increasingly require online authorization from the manufacturer before key programming, which involves paid access on our side. Older vehicles may need nothing more than a programmer and patience. When your model sits on the more involved end, we'll tell you why and what it adds.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in San Bernardino.

Practical tips before you call

• Look through the folder or pouch that came with the owner's manual. Many automakers shipped a small metal or plastic tag stamped with the key code, and some dealers tucked it in with the paperwork. Store that tag somewhere other than the car. If you ever lose every key, it can save a decoding step.
• Call earlier in the day when you can. Our hours run 6:30 a.m. to 11:30 p.m. every day, and an all-keys-lost job can take longer than a lockout. Calling with time to spare means a code request or a decode doesn't bump into closing.
• Read your auto policy, extended warranty and roadside plan for key coverage before you pay out of pocket. Some include partial reimbursement for lost keys, especially smart fobs. Ask us for an itemized receipt listing the key, cutting, programming and service call so your claim paperwork is complete.
• Make two keys during an all-keys-lost visit, not one. The second key costs far less than a second origination later, since the cutting data and programming access are already in place. Keep the spare somewhere separate from your daily ring, like a locked drawer at home, never in a magnetic box under the bumper.

What not to do

• Calling a tow truck to haul the car to the dealer before asking whether a mobile locksmith can make the key on site. Towing adds cost, and the car may sit in a service queue for days. Most vehicles can get a new key wherever they're parked, and the call to find out is free.
• Delaying the call because the registration is locked inside the car and you assume nobody can help without it. A locksmith can open the car first and verify from the glovebox. Have your photo ID ready, call with the VIN if you can see it, and let the paperwork wait for the door.
• Getting a new key made and skipping the erase step. The car will happily accept the new key while still accepting the lost one. If someone finds it in the parking lot, they have a working key to a car they can locate just by pressing the panic button.

Getting to San Bernardino

San Bernardino is our home base, so most addresses in town are a short drive. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Most trips into San Bernardino use Kendall Drive for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.

About San Bernardino: San Bernardino is the seat of San Bernardino County, the largest county by area in the contiguous United States.

Need a car key in San Bernardino?

Call (951) 903-3193 with the year, make and model, and tell us whether you still have a working key. We'll tell you whether the key can be made at the car or has to come from the dealer, and quote the job before any work starts.