Duplicate Deadbolt Key in San Bernardino: Copies That Turn the Bolt

What to know first in San Bernardino

Because a deadbolt key opens someone's home, we treat duplication as a security question as much as a cutting job. Before we cut, we confirm that you live at or own the property, using a photo ID with the address, a lease, a utility bill or a property record. When the person who needs the copy is not present, the resident can authorize it by phone and we confirm that identity as well. Keys marked Do Not Duplicate and restricted high-security keys follow stricter rules, with authorization cards or signatures required by the manufacturer. California's Locksmith Act, administered by the Bureau of Security and Investigative Services, licenses us, and you can look up our license, LCO7891, at search.dca.ca.gov. A few cautions we repeat often: do not post clear photos of your keys, keep a short list of who holds a copy, and rekey when that list gets uncertain. A new duplicate adds access. A rekey resets who has it, and the two jobs complement each other.

What we can do on-site

• One key for the knob and the deadbolt. Two keys per door is a daily annoyance, especially with kids. When the brands match, both Kwikset or both Schlage, we can rekey the deadbolt to your knob key, or the reverse, and cut spares of that one key. The old deadbolt keys stop working, which is a bonus if you have lost track of where they went.
• Restoring a worn deadbolt key. Years of turning a heavy bolt wear the peaks of a key into rounded humps. Tracing a worn key just clones the wear. We decode the deadbolt cylinder to learn the original cuts, then cut a fresh key to factory depths, which usually turns smoother than the key it replaced.
• A deadbolt key made from the lock itself. No original means nothing to trace, but a deadbolt cylinder remembers its own key. By picking it open or pulling the plug and measuring each pin stack, we work out the cuts and cut a blank to match. It is slower than copying, and it is the reason one lost key does not force a whole new deadbolt.
• Double-cylinder deadbolts with keys on both sides. If a deadbolt takes a key on both sides, the duplicate you cut becomes part of your fire plan. Keep one within reach of the door, never on a high hook or in a drawer nobody remembers, and tell every adult in the house where it lives. We also discuss swapping the interior cylinder for a thumbturn.
• Sets for rentals, house-sitters and caretakers. Hand out too many unmarked keys and you lose track of who can get in. For house-sitters and caretakers, we recommend short-term copies and a rekey afterward, which is cleaner than wondering. If you would rather not rekey, we cut stamped, numbered keys so each person is accountable for theirs.

Local factors in San Bernardino

Inland summers punish door hardware. Metal doors expand, strikes shift, and oil-based sprays turn sticky, so a deadbolt key that worked in March may bind in July. Before you pay for a duplicate deadbolt key, try your original with the door open. If it turns freely, the cure is an adjusted strike and clean, dry lubrication, not a new key. Keep spares out of a hot car, too.

Commuters leave before sunrise and return after dark, which is when stuck keys bite. Our 6:30 a.m. start fits before-work visits, and a spare deadbolt key kept with a neighbor or coworker saves a long drive home. Schedule the duplicate when the week is calm, not at the last minute on a Monday morning with a freeway merge waiting.

Foothill and canyon homes in San Bernardino need a plan for evacuations and wildfire alerts. A spare deadbolt key held by a relative or neighbor lets someone reach pets or papers if you are away. Santa Ana winds carry dust and ash that can stiffen keyways, so a puff of dry graphite helps. On narrow roads we need your gate code and a place to park the van.

Example situations

• An owner in San Bernardino brings a Medeco key with a protection mark and wants three spares. The deadbolt came with the house. We would ask for the authorization card or, if it is lost, proof of ownership, then order the blanks from the factory. This job does not finish in one visit, and we would say so up front.
• Consider a keypad deadbolt that wakes up blank after a trip, with the backup key somewhere in a kitchen drawer, or so the owner hopes. If it is not there, we would open the door, replace the batteries, cut two spares for the keyway, and show the owner where to store one so a flat battery never strands anyone again.
• Three roommates in a rental near California State University have one deadbolt key and have been passing it around like a baton. The landlord approves two more copies by text. We would confirm the approval, cut the keys, test them, and hand each roommate a differently colored cap so nobody grabs the wrong one on the way out.
• Consider a parent in Arrowhead Farms whose son is starting to get home before anyone else. The family has one deadbolt key, and it never leaves the parent's lanyard. A duplicate cut on the porch, plus a plain talk about keeping it off a school-bag keychain with his name on it, solves the problem without any drama.

Step by step with Julian's Locksmith

1. Tell us about the lock and the key. Photograph the key on both sides and the face of the deadbolt before you call, and text them if you can. Please do not post those photos online, since a clear picture of a key can be used to make a copy. Photos let us pre-sort the keyway and tell you honestly if a restricted blank is involved.
2. Confirm who is asking. Before we cut, we confirm that you live at or own the property. A photo ID with the address, a lease, a utility bill or a property record all work. For a rental, expect us to confirm landlord permission if the lease limits copies. It is a short step that protects every home we work on.
3. Read the key against the lock. We look at the key and the deadbolt together before cutting anything. Matching the blank to the keyway takes seconds. The longer look is for wear: rounded cuts, bent blades, cracked heads. We also check that the door and bolt move freely, so we do not build a new key for a lock that is about to fail.
4. Cut the duplicate. The copy is cut on a portable machine in the van, with the original or a code as the guide. We use brass or nickel-plated blanks matched to the keyway, not generic ones. Each cut gets a quick check against the source before we move on to the next copy.
5. Test it in the real deadbolt. A key that spins on a bench is not proven. We test each duplicate in the installed deadbolt, with the door shut, using a firm but normal hand. If the bolt drags at the strike, we adjust that too, so the next key you cut is not blamed for the lock's complaints.
6. Label, hand over and plan the spares. We hand the keys over, give you a work order, and suggest a simple labeling method, such as colored caps or a number stamped on the head, so you know which key is which. We will also recommend where to store a spare that is not under a flowerpot.

Pricing factors

• Keyway and blank type. Not all blanks are equal. Brass is standard; some SmartKey-style and keypad lock keys use different blanks; Medeco and Primus keys involve controlled blanks entirely. The cost follows availability and machine time. We identify the keyway on the phone where we can, so the quote does not change at the door.
• Authorization and factory ordering. Some of the cost is an honest delay. Verified authorization for a protected key, a factory order and a delivery window all sit on top of the cutting itself. We give you the realistic timeline when we quote, and we say plainly if the job needs a return trip to San Bernardino.
• Location, timing and bundling. A dedicated trip to copy a single key costs more per key than adding copies to a visit already planned. If you are hiring us for a rekey, a deadbolt install or a lockout, mention the copies you want. We are available every day, 6:30 a.m. to 11:30 p.m.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in San Bernardino.

What to do before we arrive

• Count your deadbolt keys today. Write down who holds each one, and consider a rekey if the count is fuzzy. A duplicate deadbolt key is easy to make and almost impossible to take back, so the cleanest security habit is knowing exactly how many exist.
• Check your strike plate while you are thinking about keys. A new deadbolt key will not help if the strike is held by short screws. Three-inch screws that bite into the wall stud make forced entry much harder than any key can. Mention it, and we will look while we are at your door.
• Do not photograph your keys for social media, and do not send clear pictures of them to people you do not know. Modern cameras capture enough detail to reproduce the cuts. When we ask for a picture, it goes to us only, to identify the keyway. Delete it afterward if you like.
• If your deadbolt sticks more on hot afternoons in San Bernardino, the cause may be thermal. Metal and wood doors expand and press the bolt against the strike plate. Test by trying the key with the door open. If it turns freely, adjust the strike or call for service before replacing the key.

What not to do

• Blaming the key when the bolt drags at the strike. If a new copy turns the cylinder but the bolt resists the jamb, the door has shifted or the strike has moved. A third copy will not help, and adjusting the strike will.
• Installing a double-cylinder deadbolt on the main exit door of a home. A key on both sides sounds secure, but in a fire you would be hunting for the key. Building rules generally require the main exit to open from inside without a key.
• Using a kiosk for a high-security or restricted deadbolt key. Machines in the hardware aisle cannot cut controlled blanks, and the attempts leave you with a useless key. Bring those to a locksmith who can verify authorization and order the correct blank.

Reaching San Bernardino

San Bernardino is our home base, so most addresses in town are a short drive. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Most trips into San Bernardino use Highland Avenue for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.

About San Bernardino: Norton Air Force Base operated on the city's east side from 1942 until 1994, and the site is now San Bernardino International Airport and a large logistics district.

Home lock work in San Bernardino?

Call (951) 903-3193 with the address and a quick description of the doors and locks involved. We'll quote the job before any work starts.