Rekey All House Locks in Placentia, With Nothing Missed

How this works in Placentia

People sometimes ask why they should rekey all house locks when only one key is known to be missing. The honest answer is that keys spread in ways nobody tracks. A standard house key can be copied at a hardware store kiosk in seconds, and a Do Not Duplicate stamp is a request, not a barrier. A key loaned to a contractor may have been copied for a helper. A key you think fits only the back door may also open the front if a previous owner keyed them alike. If you can't account for every copy, partial rekeys leave gaps you can't see. Rekeying everything at once closes them in one step, and it's far less expensive than replacing every lock, because the knobs, deadbolts, handlesets and finishes stay on your doors. The other benefit is a fresh start on key control: a known number of new keys, given to people you chose, with a written list of who holds one.

Work included on a typical visit

• Whole-property lock inventory. An inventory also catches locks that shouldn't be rekeyed. A slider with a wafer cylinder, a storm door handle with a proprietary key, or a worn knob gets marked for replacement or exclusion right away. You see the whole picture, with every lock and every option, before you approve a single line of work.
• Re-pinning every exterior door. Exterior doors in Southern California see sun, dust and sprinkler overspray, and their cylinders show it. As we rekey all house locks, we note any door that binds or drags, and adjust strikes or hinges where it's quick to do. A freshly pinned cylinder lasts much longer when the door isn't fighting it.
• Gates, fences and pool enclosures. Pool gates come with a safety requirement: California's pool safety rules expect them to close and latch on their own. When we rekey a pool gate lock, we check that the gate still swings shut and catches without help. A keyed gate that has to be pulled closed by hand isn't doing its job.
• Bringing mixed brands onto one key. Most houses end up with mixed hardware over the years. To rekey all house locks to one key, we choose the keyway you already have the most of, re-pin those cylinders, and replace the outliers with locks or cylinders in that keyway. Usually that means swapping two or three locks, not the whole house.
• Key cutting, key count and a key record. Keep one key cut from code as your master copy and make future duplicates from it, not from a worn copy. If you'd like restricted keys that can't be copied at a kiosk, ask about upgrading the main entry cylinders. That's a different job from a standard rekey, so we'll explain the options separately.

What's different about Placentia

Houses built before 1980 in Placentia often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Family homes in Placentia tend to accumulate keys: the babysitter, the grandparents, a neighbor who waters plants and a teenager who has lost three copies of their own. A whole-house rekey brings the key count back to something you can manage. We usually suggest a small number of new keys, a keypad or smart lock code for kids and visitors, and a clear plan for who can reach the garage and side gate.

Common situations

• A homeowner with security screens on the front and rear doors finds that each screen takes a different key from the main doors. The mismatch means a ring of five keys for one household. During a whole-house rekey, we convert the rekeyable screen cylinders to the house key and replace the one stubborn screen lock with a model that matches.
• After a separation, a homeowner in Placentia wants every lock changed before her partner collects his belongings. The front door is the obvious one, but the walk-through turns up nine more cylinders: the garage side door, a slider latch, two gates, a shed and more. We re-pin them all to one new key during a single visit, and she sets a fresh code on her smart lock before we leave.
• Over twenty years, a family in Placentia has handed spare keys to neighbors, a pet sitter, two babysitters, a visiting cousin and a long-gone housemate. Nobody can say who still has one. Instead of chasing each key, the couple rekeys every lock and decides to issue just three new keys, with a keypad code for anyone who needs occasional access.
• A remodel crew held a house key for three months, along with the garage keypad code. The work is finished and the family is pleased, but they would like the key count reset. We rekey the exterior doors and the garage entry, help them change the keypad code, and walk the property to be sure nothing else, like a side gate or lockbox, still works for the crew.

Step by step with Julian's Locksmith

1. Count the keyholes before we arrive. Walk your property before you call and note every keyed lock, including the knob beneath the deadbolt, security screens and gates. Photos of each help. A short look now saves surprises later, and it tells us whether one visit can cover everything.
2. Gather every key and show you belong at the address. We confirm you own or lawfully occupy the home before touching a cylinder. Photo ID plus a utility bill, mortgage statement, lease or similar proof works. For an inherited house, we may ask to see the paperwork showing you can act for the estate.
3. Agree on the key plan before any pins come out. This is the moment to decide about odd locks. A rusted gate latch, a worn knob or a slider with no cylinder may be replaced, left off the plan or handled separately. We explain your options for each and quote them before work begins.
4. Rekey one door at a time and test as we go. We pull each cylinder, empty the old pins, rebuild it to the new code and reinstall it. Then we cycle it from both sides before moving on, so the house is never left with several doors half-finished while we work.
5. Cut, count and test every key. New keys are cut from the same code used to pin the cylinders. We try each key in every lock it should open, and in locks it shouldn't, to confirm the plan worked and the old keys are dead. Then you count them with us.
6. Reset what rekeying doesn't touch. Rekeying changes metal keys only. Garage remotes, keypad codes, smart lock users, alarm codes and any lockbox are separate. We walk through each with you and help with the ones we handle, so the old ways in are closed on the same day.

What affects the cost

• How many keyways are in the mix. Standardizing can pay off beyond today's visit. A single keyway makes future locks and rekeys easier to match. If you were planning to replace a few worn locks anyway, doing it during a whole-house rekey often saves a separate trip.
• Condition of the oldest and cheapest locks. Builder-grade knobs, gate latches and slider cylinders are the usual troublemakers. They may re-pin, but a worn latch will fail again soon. We point out which ones are worth rekeying and which are better replaced, and you decide. Nothing is swapped without your approval.
• Specialty, high-security and smart-lock cylinders. Smart locks add a step: removing the unit, re-pinning the backup cylinder, reinstalling it and testing the motor. Retrofit models like August and Level add less than full replacements like Schlage Encode or Kwikset Halo. We tell you what your model needs.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Placentia.

Advice before you book

• Use every new key on day one. Try each in its lock from outside with the door closed behind you. A key that sticks now is a fixable problem. One that fails a month later is much harder to diagnose, and we'd rather adjust it while the tools are still out.
• Retire the hide-a-key. Fake rocks, planter bases and doormat spots are the first places a burglar looks. Give a spare to a trusted person, or switch visitors to a keypad code you can change. If you do keep a key outside, lock it in a hardened box.
• Ask about your mailbox separately. A private mailbox has its own small key and can usually be rekeyed or replaced. A cluster box belongs to the postal service or the HOA, and its locks follow their rules. Don't lump either one into your house key plan.
• Draw a rough floor plan and mark every keyed lock on it before we arrive. Include the ones you've never used, and check both faces of each door, since a keyhole on only one side still counts. That quick sketch becomes the backbone of your key record afterward.

Mistakes to avoid

• Spending a rekey on a failing lock. A knob with a worn latch or a deadbolt chewed up by a past break-in will keep failing no matter how new the key is. Replace the weak hardware and key it to match, instead of nursing it along.
• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.
• Assuming one brand's key will fit another. Kwikset and Schlage use different keyways, so a Kwikset cylinder can't be pinned to a Schlage key. Buying a few cheap replacement locks without checking the keyway just adds another key to the ring.

Reaching Placentia

Placentia is about 50 miles from our San Bernardino base, roughly 57 minutes in light traffic via I-215 South through Colton, Grand Terrace and Riverside to SR-91 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Kraemer Boulevard? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Placentia: Placentia incorporated on December 2, 1926, after about 500 residents voted to form a city, and for many years it was the smallest city in Orange County.

Planning a rekey in Placentia?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.