Tenant Turnover Rekey in Perris

What to know first in Perris

Interchangeable cores and smart locks change the economics of a turn. A small format interchangeable core, or SFIC, is a cylinder that a control key releases from the lock in seconds, so a technician can drop in a pre-pinned core instead of re-pinning at the door. The upfront hardware cost is higher and someone has to manage the core inventory, but the swap can be as quick as removing one core and seating another. Keypad and smart locks shift the work too: resident codes are cleared with a reset, while the backup keyway still needs rekeying. Neither approach is a cure-all, and a mix of conventional locks and electronics is common. For a small portfolio the swap math rarely works and plain re-pinning stays practical; for a large one, cores can pay for themselves. We'll help you compare options for your portfolio based on how often units turn, what you already own and who will manage the keys.

Work included on a typical visit

• Re-pinning to a fresh bitting on the same keyway. For most conventional units, we keep the existing Kwikset or Schlage hardware and re-pin each cylinder to a new key cut. The keyway stays standard, so replacements are easy to source. We pick the new bitting so it differs from the previous one and avoids duplicating neighboring units' cuts, then record it for the unit file.
• Rekeying units on a master key system. Some buildings have grown a patchwork of masters over the years. If yours has, a turnover rekey is a good moment to document what exists, even if you don't rebuild it. We record the master cut, the unit cut and the keyway for each door we touch, so a future system upgrade starts from facts.
• Batching units on a route day. Several vacancies are far cheaper to handle in one trip than in several. Send us the list ahead of time and we'll plan a route, quote the batch and complete the units in sequence during a scheduled visit inside our hours. Fewer mobilizations means fewer repeat access arrangements, and your invoice is organized by unit.
• Key counts, labels and the turnover key log. Every rekey should end with a number: how many keys exist for the unit and who holds each one. We label each set by unit, record the count on the work sheet and give you a copy. Add resident signatures at handoff and your office has a complete chain from cut to hand.
• When your own maintenance tech does the rekey, and when to call us. We can train your team on the basics, such as testing the old key and recording the new bitting, and take the harder cases. A split like this keeps routine units quick and sends the awkward ones to someone with the right tools. You decide where the line goes, and we'll tell you where we'd draw it.

What's different about Perris

Commuters move in and out around work schedules. Confirm the key handoff time with the new resident, and note that our hours start at 6:30 a.m. every day, so an early rekey can be finished before the day's other trades arrive. Along Perris Boulevard and other busy corridors, ask us for an honest arrival estimate that accounts for rush-hour traffic.

Newer rental communities usually come with uniform builder-grade hardware, which makes turnover rekeys quick and predictable. The details to watch are keypad or smart deadbolts and the original construction keying, which may have left a builder's key in circulation. Ask whether the initial rekey ever happened; if not, the first turn is a good moment to do it properly and start clean records.

Older rental houses and fourplexes tend to carry decades of mixed hardware, and a turn is the time to see what's really there. We rekey what's healthy, flag what's worn and quote replacements that move the building toward one keyway. In older neighborhoods around Downtown Perris, painted-over strike plates and warped doors also show up, so we check how each bolt throws before closing out a unit.

Situations this covers

• During a turn, the technician finds a second deadbolt on the back door that a resident installed without asking. Nobody has a key log for it. We'd remove it or key it to the unit's new set, repair the door prep, and the manager documents the unauthorized hardware with photos. After that, the turn checklist gets a new line: inspect every door for added locks.
• A new management company takes over a small portfolio and inherits a drawer of unlabeled keys. The first priority is a baseline: we rekey the units about to turn and set up a unit-by-unit key sheet. From then on, each turn follows the same pattern, so within a few months the whole portfolio runs on records the company created rather than records it inherited.
• An owner with eight single-family rentals has Kwikset on three houses, Schlage on four and an old brass set on one. Each turn takes longer than it should because every house needs different keys. At the next vacancy we rekey the house and quote replacing the mismatched hardware, so the portfolio moves toward a single keyway. Over a few turns, the owner's key ring shrinks and the routine gets easier.
• A property manager with a four-unit building near Southern California Railway Museum has two vacancies landing in the same week. Instead of two separate calls, she sends one list with both unit numbers, the lock counts and the next move-in dates. We quote the batch, schedule a single visit inside our hours, rekey both units and leave a labeled key set for each. One trip, one invoice, two units cleared.

How the visit works

1. Add the lock step to your turn checklist. Write the step as one line your whole team can follow: all exterior cylinders re-pinned, new keys cut to the agreed count, old keys destroyed or filed, and key log updated. Short and specific works. We can review your checklist and suggest where the step usually fits best for your type of property.
2. Send the turn list. Email or call with the units due this week: unit numbers, number of exterior doors, any lock brands you know, whether doors are keyed alike or master-keyed, and the dates the next residents arrive. A shared spreadsheet works fine. The more complete the list, the more accurate the quote.
3. Quote and slot the visit. Pricing follows cylinders and units, with the details you gave us. We call out anything that could change the number, such as a master-keyed door or a restricted keyway. Then we propose a day. If you need a hot turn, say so now, and we'll give you an honest sense of what's realistic.
4. Authorization and access. On arrival we verify who authorized the work: an owner's ID with proof of ownership, or a manager's written authorization. We confirm the unit numbers match the list and that nobody lives in a unit we are about to rekey. If a resident is still in possession, we stop.
5. Rekey, cut and test, unit by unit. Testing isn't optional. Besides trying every key, we check that each bolt throws fully with the door shut, because a rekeyed lock that sticks against the strike earns a maintenance call from the new resident. Small checks like that are why a rekey leaves fewer problems behind.
6. Close out with a key log and an invoice by unit. At the end of the visit you get labeled key sets by unit and a work sheet showing each door, each key count and any flagged hardware. The invoice lists units separately, which makes it easy to match to work orders and to pass costs along to an owner.

How we quote the job

• Cylinders per unit and units per trip. Count every keyed point in each unit, not just the entry. Patio slider locks, storage closets, balcony doors and keyed interior doors all add cylinders. Send a complete list and we'll quote the batch accurately. A count that grows on site means a requote, not a surprise.
• Key system: different, alike or master-keyed. If you're considering moving to a master system, restructuring an entire building is a different project from a turn rekey and is priced as one. Don't try to fold it into a single unit turn. We can walk the building, describe what a system would involve and give you an honest sense of scale.
• Key counts and key type. Fobs and cards for common doors, such as gates or gyms, are separate from the unit key and handled differently. Rekeying a unit doesn't touch your access control system. If a resident's fob also needs deactivating, that's a separate step with your access system provider or the HOA.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Perris.

Mistakes to avoid

• Relying on residents to report copies. A resident who made a copy rarely mentions it, and a landlord has no way to check. A tenant turnover rekey at every turn removes the question. A policy that depends on honesty will eventually leave a gap.
• Rekeying before the make-ready is done. Paint, dust and adhesive end up in the cylinders, and a new key can get stiff within weeks. Contractors who already hold cut keys keep access, too. Schedule the lock step after the last trade and before the final inspection.
• Waiting for a problem to prompt the rekey. A turn without a lock step becomes a policy by accident, and the first time it matters is the day a former resident's key shows up in a complaint. Decide once, write it down and follow it.

Advice before you book

• Check gate, mailbox and amenity keys alongside the unit key. A departing resident may hold a pool key, a mailbox key, a gym fob and a gate remote. The unit rekey handles only the door. Add a line for each of the others to your checklist and name who handles them.
• Ask residents to return all keys at move-out inspection and sign a key return form. Even though you will rekey regardless, the form creates a record and sets expectations. It also saves arguments later about what was handed back and when.
• Photograph the hardware in every unit the first time we visit. Faceplates show brand and model, and the door edge shows backset and bolt style. Those photos let us bring the right parts on later turns and make quotes for new staff or vendors far more accurate.
• Test with the old key too. It's easy to confirm that the new key works and forget to prove the old one fails. A quick trial at each door is what turns 'we rekeyed' into 'we verified.' Write 'old key tested' on your checklist so it isn't skipped.

Getting to Perris

Perris is about 32 miles from our San Bernardino base, roughly 37 minutes in light traffic via University Parkway to I-215 South through San Bernardino, Colton and Grand Terrace, along the SR-60 overlap in Riverside and past March Air Reserve Base. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

We plan the drive the way a delivery route gets planned: freeway first, Rider Street where it makes sense, then the side streets you describe. A landmark or the color of your building helps the technician spot you.

About Perris: Perris incorporated on May 26, 1911, and takes its name from Fred T. Perris, chief engineer of the California Southern Railroad.

Planning a rekey in Perris?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.