Making the Rekey a Routine Step of Every Mentone Unit Turn

Tenant Turnover Rekey in Mentone: what to expect

Where the rekey sits in the make-ready decides whether it holds anything up. Cylinders dislike paint, drywall dust and adhesive, so the cleanest spot is after painting, touch-ups and the deep clean, and before the final inspection. If crews need access during the turn, hand them a temporary key and make the rekey the last lock-related step. Schedule it for the day the unit is otherwise ready rather than the day it becomes vacant, because lock work can usually be done in an empty, finished unit with almost no setup. Build the slot into your checklist with a name, such as lock reset, and a clear owner. When the step is on the board, it gets done. When it lives in someone's head, it gets skipped during a busy week. A well-placed slot also protects finished work, because nobody wants a technician removing hardware around fresh paint on move-in day. Treat the lock slot like any other trade's.

What we can do on-site

• Setting a rekey-every-turn policy. The most useful thing we do for a new client isn't a rekey, it's a conversation about policy. Rekey every turn, or only when keys are missing? We explain the tradeoffs and help you write a one-line rule your team can follow. Once the policy is written, scheduling a tenant turnover rekey stops being a judgment call.
• Rekeying units on a master key system. Cross-keying is the master-system risk: pin a cylinder wrong and another unit's key might open it. We check each rekeyed lock against the master and, where records allow, a sample of neighboring unit keys. If the master records are missing, we'll say so and talk through charting the system as a separate project.
• Keyed-alike sets per unit. When keyways differ, such as a Kwikset deadbolt and a Schlage knob on the same door, one key can't run both. We either replace one lock so they share a keyway or key each to its own key. We show you the tradeoff: replacement costs more now but simplifies every future turn.
• Key counts, labels and the turnover key log. Resist the urge to hold extra loose keys just in case. Every spare is a copy that has to be accounted for. We suggest a fixed number per unit, plus one controlled set for the office or maintenance. When a key is lost, the log tells you exactly which locks are affected.
• When your own maintenance tech does the rekey, and when to call us. We can train your team on the basics, such as testing the old key and recording the new bitting, and take the harder cases. A split like this keeps routine units quick and sends the awkward ones to someone with the right tools. You decide where the line goes, and we'll tell you where we'd draw it.

What's different about Mentone

Inland heat shortens the life of lock hardware in rental units: finishes fade, plastic parts crack, and warped doors strain latches. A turn is a chance to inspect every bolt and strike while the unit is empty. We rekey the cylinders, check how each latch engages, and flag the units that need weatherstripping or adjustment so the next resident isn't the one to find out.

Older rental houses and fourplexes tend to carry decades of mixed hardware, and a turn is the time to see what's really there. We rekey what's healthy, flag what's worn and quote replacements that move the building toward one keyway. In older neighborhoods around Capri, painted-over strike plates and warped doors also show up, so we check how each bolt throws before closing out a unit.

Single-family rentals in suburban Mentone are often managed by owners or small firms that handle turns one house at a time. Each house has a front door, back door, garage side door and sometimes a gate, and each can use a different brand. Standardizing on one keyway over a few turns cuts the key ring and the time per visit. Keep a one-page key sheet for each house.

Example situations

• A new management company takes over a small portfolio and inherits a drawer of unlabeled keys. The first priority is a baseline: we rekey the units about to turn and set up a unit-by-unit key sheet. From then on, each turn follows the same pattern, so within a few months the whole portfolio runs on records the company created rather than records it inherited.
• A model unit is used for self-showings with a keypad deadbolt. Every few weeks the codes pile up from agents, photographers and applicants. At each turn we help the manager clear the codes, check the batteries and rekey the backup cylinder. The unit is then ready for the next resident, and the manager sets codes to expire so the pile doesn't grow back.
• During a turn, the technician finds a second deadbolt on the back door that a resident installed without asking. Nobody has a key log for it. We'd remove it or key it to the unit's new set, repair the door prep, and the manager documents the unauthorized hardware with photos. After that, the turn checklist gets a new line: inspect every door for added locks.
• A condo owner who rents a unit in Mentone deals with an HOA that controls the front-gate fob and the mailbox. When the resident leaves, the owner books us for the door lock and emails the association about the fob. The key record shows three separate access items with three separate owners, so nothing falls through the cracks.

Step by step with Julian's Locksmith

1. Add the lock step to your turn checklist. Start on your side. Name the step something specific, like lock reset, assign an owner and place it after paint, clean and repairs but before final inspection. Add a field for the date it was done. When the step lives on the checklist, it stops being forgotten during busy weeks.
2. Send the turn list. If this is your first turn with us, expect a few extra questions about the building. We might ask for master key bitting records, the keyway used and past rekey dates. After the first round, a short list per turn is enough, because the building's profile is already in your own file.
3. Quote and slot the visit. Give us the deadline, not just the date you'd like. If the new resident arrives Friday, the rekey has to happen by Thursday at the latest. Knowing the true deadline lets us choose the day that leaves breathing room for surprises.
4. Authorization and access. California's Locksmith Act is why we ask for authority before touching a lock, even for a property you manage every day. It also protects you from someone claiming to represent an owner. Our license, LCO7891, can be checked at search.dca.ca.gov before we arrive.
5. Rekey, cut and test, unit by unit. We keep a running sheet as we go: unit number, door, brand, number of keys cut and anything unusual. If a lock needs replacement, it goes on the sheet with a photo, and the quote for that item comes separately. You see the same notes we do, so there are no surprises on the invoice.
6. Close out with a key log and an invoice by unit. At the end of the visit you get labeled key sets by unit and a work sheet showing each door, each key count and any flagged hardware. The invoice lists units separately, which makes it easy to match to work orders and to pass costs along to an owner.

What affects the cost

• Hardware standardization. A property with one brand and keyway throughout turns faster than one with a mix. Standard parts, familiar pin kits and predictable cylinders mean fewer surprises and less time per unit. If your hardware varies, standardizing during turns, one door at a time, lowers the cost of every future rekey.
• Key counts and key type. Fobs and cards for common doors, such as gates or gyms, are separate from the unit key and handled differently. Rekeying a unit doesn't touch your access control system. If a resident's fob also needs deactivating, that's a separate step with your access system provider or the HOA.
• Lead time and the vacancy window. Lead time shapes both price and options. A planned visit booked a few days ahead inside our regular hours is easier to schedule than a same-day request. We're open every day, 6:30 a.m. to 11:30 p.m. That includes Fridays and Saturdays, so Friday and weekend turns can be planned like any other day.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Mentone.

What to do before we arrive

• Review your lock records once a year. Which units turned most often, which doors needed repair, which hardware aged badly? A short annual review points to the hardware worth replacing and the units that deserve a better lock. A tenant turnover rekey routine gets cheaper when the locks themselves improve.
• Standardize on a single keyway per property whenever you replace hardware. Mixed brands are the main reason turns take longer than expected. Replace the odd lock out during a turn, not in a panic during a repair call, and your key rings will shrink over time.
• Write down who is authorized to order lock work, and keep the list current. Staff changes create their own risk: a former employee who can still authorize work, or a new hire who doesn't know the policy. A one-page list with names and phone numbers helps your vendors and your office.
• Treat contractor keys as part of the policy. Painters, cleaners and carpet crews hold keys during a turn, so the rekey should come after they finish, not before. Track who has a temporary key and collect it before the permanent set is cut.

Mistakes to avoid

• Waiting for a problem to prompt the rekey. A turn without a lock step becomes a policy by accident, and the first time it matters is the day a former resident's key shows up in a complaint. Decide once, write it down and follow it.
• Rekeying before the make-ready is done. Paint, dust and adhesive end up in the cylinders, and a new key can get stiff within weeks. Contractors who already hold cut keys keep access, too. Schedule the lock step after the last trade and before the final inspection.
• Skipping the old-key test. A cylinder that was pinned incorrectly can accept both keys, and nobody finds out until a dispute. Testing the old key at every door takes seconds and proves the work was done. Write the result on the work sheet so the proof outlasts your memory.

Service in Mentone

Mentone is about 20 miles from our San Bernardino base, roughly 27 minutes in light traffic via I-215 South to SR-210 East through Highland, exit San Bernardino Avenue in Redlands. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Colton Avenue? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Mentone: Seven Oaks Dam, a 550-foot earth and rock embankment built by the U.S. Army Corps of Engineers between 1993 and 2000, holds back Santa Ana River floods in the canyon above Mentone.

Planning a rekey in Mentone?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.