Mentone, San Bernardino County
Mentone Business Lock Rekey Without Closing for the Day
Short answer: Rekey your business locks whenever a key leaves your control: an employee quits or is let go without returning keys, a manager changes, you buy the business, you move into a space someone else leased, or a key ring disappears. Rekeying is usually faster and less costly than replacing commercial hardware, and it can be scheduled before you open or after you close.

You can't close the shop for a day just to change keys, and a business lock rekey doesn't ask you to. Each lock is rekeyed in place, one door at a time, so the front entrance stays usable while we work on the back, and a small job often fits into the quiet stretch before opening or after close. Julian's Locksmith starts at 6:30 a.m. every day and works until 11:30 p.m. Tell us when your business is slowest and how many doors and padlocks you want included, and we'll quote and schedule around your hours in Mentone.
Business Lock Rekey in Mentone: what to expect
Because a business lock rekey controls who can enter a workplace, we confirm authority before touching anything. California's Locksmith Act, administered by the Bureau of Security and Investigative Services, holds locksmiths responsible for verifying they're working for someone entitled to the job. For a business, that usually means photo ID plus a business license, fictitious business name filing, lease, or ownership paperwork in your name. A manager can authorize the work with a signed note or email from the owner. Franchisees should check whether the franchisor or landlord controls the locks. If you lease, look for the clause covering lock changes, since many commercial leases require landlord consent and a key for management. If an employee has made threats, put safety first: California lets employers seek a workplace violence restraining order on behalf of employees, and law enforcement should be your first call. We can rekey promptly once the paperwork is sorted, and Julian's Locksmith's license, LCO7891, can be verified at search.dca.ca.gov.
How we can help in Mentone
- Rekey after an employee leaves. When someone leaves your business with a key, or you can't confirm every copy came back, we rekey the locks that key operated. The departing employee's key stops working that day, remaining staff get new keys, and the locks you already own stay on the doors. We test the old key in each lock to confirm.
- Move-in rekey for a newly leased space. Before moving equipment, inventory or records into a new space, rekey it. We confirm the lease or the landlord's written approval, rekey the locks, cut keys for you and any management copy the lease requires, and note which doors are shared with neighbors so you know where your control ends.
- Rekey and repair after a break-in. After a break-in, locks may be damaged as well as compromised. We assess each one: a pried storefront deadbolt or a punched cylinder usually needs replacement, while undamaged locks can be rekeyed if keys were taken. Either way, you leave with secure doors and a clear list of what changed.
- Back doors, delivery doors and alley entrances. Delivery doors often end up keyed to a separate key that vendors or drivers were given years ago. During a business lock rekey we find out who still holds that key and decide with you whether vendors need one at all, or whether staff should simply let deliveries in.
- Cash rooms, offices and stockrooms. Interior doors protecting cash, records or high-value stock deserve their own key. We rekey office and stockroom locks so only the people you choose can open them, even if a staff entrance key goes missing. Many businesses discover their office lock has worked with the front-door key all along.
What's different about Mentone
Neighborhood businesses in Mentone, such as daycares, tutoring centers, salons and small professional suites, often share a center with families coming and going all day. A business lock rekey is common after a staff change, especially where children or sensitive records are involved. Interior doors for supplies, records and cash deserve their own keys, separate from the one that opens the front.
Owners who travel into Mentone from across the region often rely on early openers and late closers, which puts keys in more hands. A business lock rekey is easy to schedule around that. We start at 6:30 a.m. every day, so an owner can meet us before opening, and we're done before the evening drive home. Give openers numbered keys and keep a spare set at home.
Not every business operates from a shopping center. Home offices, converted cottages and small shops in older buildings around Crafton often have mixed, aging hardware, including old mortise locks and knobs from several eras. A business lock rekey in these buildings may mean rebuilding tired cylinders or replacing a few worn pieces. We try to preserve original hardware that still works, and we say so when it is time to retire a lock.
Example situations
- Two partners who co-own a retail shop decide to part ways, and one wants the locks changed before the lease conversation. We explain that we cannot take sides. We need whoever has legal authority over the space, often both owners or the person named on the lease, to approve the work. Once both sign off in writing, we rekey and split the new keys evenly.
- A contractor sets his key ring on the roof of his truck at a gas station, and it is gone by the time he drives back. The ring held his shop key, office key, a padlock key and a keychain with the company name. We confirm his business license on arrival, rekey the shop door, office and padlocks to one key, and cut four copies for his crew.
- A seasonal garden shop hired six holiday workers, each given a front-door key, and the season is over. The owner cannot recall who returned theirs. In January, during the slow weeks, we rekey the entrance, the greenhouse door and the cash cabinet, and suggest a keypad on the stockroom door instead of more metal keys. She keeps a short checklist for next year's hires.
- A dental office in Mentone lets a front-desk employee go. The patient records room and the supply closet turn out to share a key with the front entrance, which nobody realized. We rekey all three onto separate keys so the front-desk key opens only the front. The practice manager keeps the records room key, and the dentist carries an owner-level key.
From your call to the finished job
- Tell us what happened and which doors are involved. Describe your business and the problem in plain terms. Is it one departed employee, or an unknown number of keys? Does your building have a landlord, a master key or a franchisor with rights to the locks? Those answers shape the plan before anyone drives out.
- Show who you are and that you can authorize the work. Leased space adds one more question: does your lease allow lock changes? If it requires landlord consent or a management key, have that approval ready. A forwarded email from the property manager is usually enough, and it keeps you out of a dispute later.
- Survey the doors and test the old keys. On arrival we walk the premises with you, door by door. We try the old key in every lock, including ones you didn't expect, and note brand, cylinder type and condition. That test shows exactly what the missing key could open, so the scope rests on facts, not guesses.
- Decide key levels, key count and who holds what. Ask yourself who truly needs each key. The opener, the closer and the manager are obvious. Vendors, cleaners and part-timers are the usual debate. Some owners give them a keypad code or let a keyholder open for them, and we'll help you weigh the options.
- Rekey in sequence while you stay open. We rekey one lock at a time, so your business never sits with an unsecured door. The front stays usable while we work on the back, and we test each lock from both sides before moving on. Most small jobs fit between your opening and closing routines.
- Hand over keys, record them and reset the extras. A rekey doesn't touch alarm codes, keypad codes, remote fobs or logins to camera and POS systems. We'll remind you to change those the same day, and when an item needs a low-voltage contractor, such as an alarm panel or card reader, we say so honestly.
Pricing factors
- The kind of locks on your doors. Condition matters as much as type. A well-kept cylinder re-pins in no time, while a gritty or damaged one needs cleaning, new springs or outright replacement. We judge each one by feel and by taking it apart, since wear is rarely visible from outside. After a break-in, expect a few locks to need replacing instead of rekeying.
- Key levels and how many keys you want. Key count is a quiet cost driver. Each key is cut and checked individually, so twelve keys cost more than three. But handing out too few leads staff to copy their own at a hardware store. We'll suggest a number based on your shifts.
- Same-visit extras like safes, closers and codes. Ask while we're there. A door that doesn't latch, a strike that rattles or a cash room lever that wobbles is cheaper to fix while we're already set up. We'll quote it, you decide, and the rekey doesn't depend on your answer.
Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Mentone.
Common errors that cost time and money
- Leaving alarm and keypad codes alone. A former employee may still know the code that disarms your system, and no new key changes that. Reset codes and remote programming on the same day as the business lock rekey, or you've secured only half the building.
- Rekeying only the front door. Keys rarely fit a single lock, and many businesses key the back door, office and padlocks alike without realizing it. Test the missing key in every lock before deciding the scope, or you could leave behind a key that still opens the cash room.
- Changing locks on leased space without checking the lease. Landlords often require notice, a copy of the key or a master key for emergencies. Skipping that step can put you in breach, cut off the building's own emergency access and turn a simple rekey into a dispute.
Practical tips before you call
- Pick a quiet window. Early weekday mornings before you open, or evenings after close, work well, and a technician can work around staff without much interruption. We work weekends too, but a shop that is busy on weekends is still better off rekeying early in the week.
- Reset the digital doors the same day. Change the alarm code, any keypad codes, and garage or gate remote programming, and delete the departed person's access from the camera app, POS login and Wi-Fi password. Mechanical rekeying shuts the physical doors, but a code in someone's head is just as good as a key.
- Treat every unreturned key as a copy in circulation. A returned key proves nothing about duplicates made last year. When a key position turns over, such as a manager, an opener or anyone who handled cash, decide in advance that the locks get rekeyed, so you aren't making an awkward judgment call about a person.
- Ask the vendors who enter after hours, especially janitorial companies, how many keys their crew holds and how they track them. A company that cleans your shop at night may have given a copy to each employee. Ask them to sign for each key and call you when their staff changes.
Reaching Mentone
Mentone is about 20 miles from our San Bernardino base, roughly 27 minutes in light traffic via I-215 South to SR-210 East through Highland, exit San Bernardino Avenue in Redlands. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.
Most trips into Mentone use SR-38 for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.
About Mentone: Mentone is an unincorporated census-designated place with no mayor or city council, so San Bernardino County provides fire protection and sheriff's patrol comes from the Yucaipa station.
| Neighborhoods | Original Mentone townsite, Mill Creek Road, Opal Avenue and Jasper Avenue, Crafton, Crafton Avenue corridor, Mentone Boulevard corridor |
|---|---|
| ZIP codes | 92359 |
| Main routes | SR-38, SR-210, I-10, Lugonia Avenue |
| From our San Bernardino base | about 20 miles via I-215 South to SR-210 East through Highland, exit San Bernardino Avenue in Redlands, then east to Lugonia Avenue (SR-38), which becomes Mentone Boulevard at Wabash Avenue |
Planning a rekey in Mentone?
Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.
Frequently asked questions
How many keys should I have cut?
Cut as few as your operation really needs, then add one spare set kept off-site. For a small shop, that usually means one owner key, one for each manager and an entrance key for each staff member who opens or closes. Fewer keys means fewer problems when someone leaves. We'll help you count by role, not by habit.
How much does it cost to rekey a business?
Price depends mainly on how many cylinders you're rekeying, the lock types, how many keys and key levels you want, and the timing of the visit. We quote the whole job before starting, and no work begins until you approve it. Call (951) 903-3193 with your door count and lock types for a quote you can plan around.
Do I need my landlord's permission to rekey?
If you lease, probably. Many commercial leases require landlord consent for lock changes, a key for management, or both. Read the lease or ask your property manager, and keep their answer in writing. We won't rekey leased space without confirming you're allowed to, and we coordinate with building master keys when they exist.
Can you rekey while customers are inside the shop?
Usually yes. We work one lock at a time, so the entrance stays usable, and a small job is quiet. For a front door that customers use constantly, we may schedule that lock during a lull or send people to another entrance while we finish it. Tell us your busiest times and we'll plan around them.
Will a rekey change my alarm code or keypad codes?
No. A business lock rekey only changes the keys that work in mechanical cylinders. Alarm codes, keypad lock codes, remote fobs and any app or camera logins stay as they were, so change those the same day. For keypad locks and some electric strikes we can help. For alarm panels, your alarm company handles the code.
Do you replace my business locks, or rekey them?
Whenever the hardware is sound, we rekey it. We change the pins inside so new keys work and old ones don't, and your locks, handles and panic bars stay where they are. We replace a lock only when it's damaged, worn out, a budget model that can't be rekeyed, or when you ask for a different type. You'll know which before we begin.
How far is Mentone from your base?
Mentone is about 20 miles from our San Bernardino base, roughly 27 minutes in light traffic. Arrival time depends on traffic and on the job the technician is finishing, so we give you an estimate on the phone before you commit.
Related services in Mentone
Business Lock Rekey in nearby cities
- Business Lock Rekey in RedlandsSan Bernardino County
- Business Lock Rekey in YucaipaSan Bernardino County
- Business Lock Rekey in HighlandSan Bernardino County
- Business Lock Rekey in Loma LindaSan Bernardino County
- Business Lock Rekey in San BernardinoSan Bernardino County
- Business Lock Rekey in ColtonSan Bernardino County
- Business Lock Rekey in Moreno ValleyRiverside County
- Business Lock Rekey in Grand TerraceSan Bernardino County

