Duplicate Deadbolt Key in Lakewood: Copies That Turn the Bolt

Duplicate Deadbolt Key in Lakewood: what to expect

Because a deadbolt key opens someone's home, we treat duplication as a security question as much as a cutting job. Before we cut, we confirm that you live at or own the property, using a photo ID with the address, a lease, a utility bill or a property record. When the person who needs the copy is not present, the resident can authorize it by phone and we confirm that identity as well. Keys marked Do Not Duplicate and restricted high-security keys follow stricter rules, with authorization cards or signatures required by the manufacturer. California's Locksmith Act, administered by the Bureau of Security and Investigative Services, licenses us, and you can look up our license, LCO7891, at search.dca.ca.gov. A few cautions we repeat often: do not post clear photos of your keys, keep a short list of who holds a copy, and rekey when that list gets uncertain. A new duplicate adds access. A rekey resets who has it, and the two jobs complement each other.

How we can help in Lakewood

• Copies for standard Schlage and Kwikset deadbolts. If your deadbolt says Schlage on the face, odds are strong it takes an SC1 key; Kwikset ones usually take a KW1. We keep both blanks on hand, plus the six-pin variants. Hand us your key and we cut the copy on the spot, then check that the bolt throws smoothly with the door open and closed.
• One key for the knob and the deadbolt. Plenty of houses come with a deadbolt on one key and a knob on another, so everyone carries two. A plain copy will not fix that. We can pin the knob and deadbolt to the same key, which is a quick rekey rather than a copy, then cut as many duplicates of the single key as you need.
• A deadbolt key made from the lock itself. Lost the only deadbolt key? You may still have a path. If the door is open, we remove the cylinder, read the pin heights and cut a first key without any original. If the door is locked, we open it first with picking or a bypass, then make the key. Either way, ID or proof of residence comes first.
• Restricted and high-security deadbolt keys. Keys stamped Do Not Duplicate are not magic. The stamp is a request, not a technical barrier, and many kiosks ignore it. We take it seriously because the whole point is controlling who has access. We copy those keys for an owner who can show ID and proof of authority, and we explain why the stamp was there.
• Several doors, one keyed-alike set. Builders sometimes key the front and back doors alike and leave the garage separate, so a family carries two keys without knowing why. During one visit we map which deadbolts share a keyway and a pin pattern, group them where it makes sense, and cut copies so everyone holds one reliable key for the doors they use.

How Lakewood shapes the job

Older homes in Lakewood often carry a deadbolt added decades after the house was built, and its key may be a brass original with worn cuts. Surface-mount and mortise deadbolts from the 1960s and 1970s sometimes use keyways that kiosks no longer stock. Bring the key and tell us the street or neighborhood, say near Mayfair. We identify the lock, read its pins when the key is too worn to trace, and cut a fresh one.

Commuters leave before sunrise and return after dark, which is when stuck keys bite. Our 6:30 a.m. start fits before-work visits, and a spare deadbolt key kept with a neighbor or coworker saves a long drive home. Schedule the duplicate when the week is calm, not at the last minute on a Monday morning with a freeway merge waiting.

Apartment tenants usually cannot copy keys freely, because the lease often restricts duplicates and the deadbolt may belong to a building system. We ask for the landlord's written approval or a call from the property manager. California landlords must provide working deadbolts on main entry doors, but that does not mean unlimited keys. A numbered copy for a roommate is common; ask first, and the paperwork stays simple.

Example situations

• Consider a keypad deadbolt that wakes up blank after a trip, with the backup key somewhere in a kitchen drawer, or so the owner hopes. If it is not there, we would open the door, replace the batteries, cut two spares for the keyway, and show the owner where to store one so a flat battery never strands anyone again.
• An owner in Lakewood brings a Medeco key with a protection mark and wants three spares. The deadbolt came with the house. We would ask for the authorization card or, if it is lost, proof of ownership, then order the blanks from the factory. This job does not finish in one visit, and we would say so up front.
• Consider a parent in Lakewood whose son is starting to get home before anyone else. The family has one deadbolt key, and it never leaves the parent's lanyard. A duplicate cut on the porch, plus a plain talk about keeping it off a school-bag keychain with his name on it, solves the problem without any drama.
• On a hot afternoon, a homeowner finds the deadbolt key harder to turn and decides a new copy will help. We would test the original with the door open, see that it turns freely, and find that the warm metal door has expanded and is rubbing. A strike adjustment and dry lubricant fix it, so the duplicate becomes a spare, not a cure.

How the visit works

1. Tell us about the lock and the key. Photograph the key on both sides and the face of the deadbolt before you call, and text them if you can. Please do not post those photos online, since a clear picture of a key can be used to make a copy. Photos let us pre-sort the keyway and tell you honestly if a restricted blank is involved.
2. Confirm who is asking. Keys are copied for people who are entitled to them, so we check. If the person who needs the copy is not you, say a grown child or a caretaker, the resident can approve it by phone and we verify the resident's ID too. If the paperwork does not line up, we pause and sort it out.
3. Read the key against the lock. We look at the key and the deadbolt together before cutting anything. Matching the blank to the keyway takes seconds. The longer look is for wear: rounded cuts, bent blades, cracked heads. We also check that the door and bolt move freely, so we do not build a new key for a lock that is about to fail.
4. Cut the duplicate. Cutting is steady, deliberate work. We clamp the blank, trace or code-cut each depth, then deburr the edges so no metal filings carry into your lock. Rushed, burr-laden copies are a main reason new keys feel rough. Multiple copies are cut from the same source, never from each other.
5. Test it in the real deadbolt. Testing happens where it counts: at your door. We turn each key repeatedly, check the full bolt throw, listen for scraping against the strike, and test from outside and inside. Anything that binds is corrected before we pack up. A kiosk cannot do any of that, which is a big reason we work at the door.
6. Label, hand over and plan the spares. The last few minutes are practical. We remove loose burrs, confirm the keys sit properly on the ring, and tell you which key to treat as the master. We suggest using the duplicates for daily life and keeping the original in a drawer, so you always have a clean source for the next copy.

What affects the cost

• Tracing versus decoding. Think of it as a copy versus a rebuild. If your key is crisp and sharp, we trace and cut. If it is worn smooth, we rebuild it from the lock's own measurements, which means removing or picking the cylinder. The second route costs more and gives you a key that outperforms the old one.
• How many keys and how many locks. Quantity matters in both directions. A single spare is inexpensive but leaves you exposed; a dozen copies add little per key, and then the real question is who holds them. We quote by the number of keys and locks, and we may talk you out of cutting more keys than you can account for.
• Location, timing and bundling. We drive to you, so distance from our San Bernardino base and the time of your visit shape the price. Appointments inside normal working hours are usually simpler to schedule than late-evening ones. Combining key copies with another job, such as a lock repair, spreads the trip over more work.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Lakewood.

What not to do

• Spraying oil in the keyway. Oil-based lubricants attract dust, and inland dust plus summer heat turn them into sticky grime that makes keys hang up and pins stick. Dry graphite or a PTFE-based product is the better choice, applied sparingly.
• Copying a copy. Every generation adds small errors, and by the third one the key may drag, jam or refuse to turn the bolt. Always cut from the original, or let a locksmith cut by code when the original is worn.
• Skipping the test at the door. A duplicate that works on a bench can still bind in an installed deadbolt. Walk the key through a full lock and unlock with the door open, and again with it closed, before you accept it.

Practical tips before you call

• Check your strike plate while you are thinking about keys. A new deadbolt key will not help if the strike is held by short screws. Three-inch screws that bite into the wall stud make forced entry much harder than any key can. Mention it, and we will look while we are at your door.
• Put a bright cap on the deadbolt key if it looks like the knob key. People jam the wrong key in at night, bend the blade, and snap it off. A distinct color helps, and kids learn the right key faster by color than by squinting at tiny cuts.
• Count your deadbolt keys today. Write down who holds each one, and consider a rekey if the count is fuzzy. A duplicate deadbolt key is easy to make and almost impossible to take back, so the cleanest security habit is knowing exactly how many exist.
• Do not force a stiff key. If it sticks halfway, back it out and try again with gentle, straight pressure and no prying. Twisting hard on a deadbolt key bends or snaps it inside the cylinder, and extraction costs more than a copy. If it keeps sticking, stop and call.

Reaching Lakewood

Lakewood is about 62 miles from our San Bernardino base, roughly 68 minutes in light traffic via University Parkway to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Our path into Lakewood depends on where the previous job wrapped up. Sometimes that's a straight run via Pioneer Boulevard; other times it's surface streets the whole way. Either way, you get a heads-up call when the technician is close.

About Lakewood: On March 24, 1950, the first day of sales, an estimated 30,000 people lined up to walk through seven model houses at the Lakewood Park sales office.

Home lock work in Lakewood?

Call (951) 903-3193 with the address and a quick description of the doors and locks involved. We'll quote the job before any work starts.