Keyed Alike Locks in La Verne: How They Work and How to Get Them

How this works in La Verne

The word 'alike' hides a decision, because very few households want every lock on one key. Take a typical house: a front deadbolt, a back-door deadbolt, a garage entry knob, a side-gate padlock, a shed padlock and a casita door. Keying all six alike gives you one key and the widest exposure. Keying them in groups is usually smarter: front, back and garage entry alike for the family, the gate and shed alike for the gardener and pool service, and the casita on its own key for a renter or relative. On key charts this shows up as alike-by-group, with symbols like AA for one group and AB for the next. Add a master key, which opens every group while each group keeps its own key, and you have a small master key system. In La Verne we plan the groups with you before pinning anything, because it's much easier to decide on paper than to re-pin a second time.

How we can help in La Verne

• Rekeying locks you've just bought. Bought two or three deadbolts that each came with their own key? Don't swap them out. We pin the extra cylinders to match the first one, or to a fresh combination for all of them, so the set becomes keyed alike right at your door in La Verne. We test every key in every lock before the old keys go in a drawer.
• Matching existing locks to a key you already carry. Your front door key is the one you actually use, so we make it the pattern for the group. We read its cuts, then re-pin the back door, garage entry and any other same-keyway locks to match. Nothing is replaced, nothing is drilled, and the locks you've already paid for keep working.
• Alike by group, different between groups. Groups work like wings of a hotel: everything the same inside, nothing the same across. Front, back and garage entry become one group; sheds, side gates and the pool equipment cabinet become another. If you later add a master key above both groups, the structure is already in place.
• Padlocks, gate locks and outbuildings. Barns, sheds, side gates and storage cages usually mean padlocks, and padlocks come in keyed alike sets for a reason. We match padlocks within one set, and where a model won't re-pin, we swap in a same-make padlock that will. Hardened shackles and covered keyholes stand up better to inland sun and dust.
• Key cutting, labeling and a key record. A keyed alike job isn't finished until the keys are. We cut spares to code on our portable machine, check each one against every lock, and tag them with a neutral code instead of your address. A short key record stays with you so future copies match.

How La Verne shapes the job

Older La Verne homes carry a lifetime of replaced hardware: a mortise set at the front from the 1950s, a deadbolt added in the nineties, a brass knob at the back. Their keyways rarely match, so the first job is mapping them. We re-pin what shares a keyway to one bitting, swap a cylinder where an old mortise body can take a modern one, and replace the oddballs, keeping original handles wherever we can.

Near campuses in La Verne, shared student houses suit keyed alike exterior doors so every roommate carries one key. They also turn over every year, and each returning or departing key becomes a copy at large. We re-pin the exterior doors to a new combination each lease cycle, which keeps the one-key convenience without letting last year's tenants in. If a house adds or loses a roommate mid-lease, one short visit resets the whole group.

In 55-plus communities near Heritage Park, fewer keys means fewer problems. We key the front, patio and garage doors alike and choose a large-head key that is easier to grip and find. Storage units stay separate. We also suggest a spare with a trusted neighbor or family member, so a lockout never becomes an emergency, and we leave a plain-language key card so caregivers know which key does what.

Common situations

• The board of a small community keeps losing track of keys. We key the clubhouse and pool-equipment room on a board key, the irrigation room and trash enclosure on a maintenance key, and add a master for the management company. Volunteers sign for the keys they hold, and a missing one means re-pinning only its group.
• A Schlage front deadbolt and a Kwikset back deadbolt make a classic mismatch. The owner wants one key. We explain that the keyways differ, so no amount of re-pinning bridges them. The practical fix is replacing the Kwikset with a Schlage deadbolt in the same finish, then pinning it to the front key. It costs less than redoing both doors, and the finished pair matches.
• A property manager with six single-family rentals has entry locks that were never keyed to any system, and every turnover means hunting for the right key. We key each house's doors alike internally, assign a master to the management office, and set up a tagging scheme so one key opens one house with no leftover duplicates.
• The owner of a small retail shop in La Verne carries five keys for three doors and a cash room. We key the front, back and stockroom alike, put the office and cash room on a second key, and tag each set with a code. Opening shifts get one key, the owner keeps the second, and a former manager's stockroom key stops working.

Step by step with Julian's Locksmith

1. Tell us what you have and what you want alike. Start with a walk around your property and count the keyholes, including the garage entry, side gate, shed and any detached unit. Write down the brand on each. Send photos if you can. A good list lets us quote accurately and avoids a second trip for hardware nobody mentioned.
2. Confirm you're authorized. Under California's Locksmith Act, a locksmith is expected to know who they're working for. We'll ask for photo ID and proof of residence or ownership, and for rentals, landlord approval if you're the tenant. It takes a minute. Our license, LCO7891, can be checked at search.dca.ca.gov before we arrive.
3. Choose the grouping and the key. If you want to add a lock to the group next year, say so. We note the keyway, the bitting and the key blank so future locks can join. We'll also tell you which of your locks cannot join, because of keyway or construction, before any parts come apart.
4. Re-pin or match each cylinder. Mortise cylinders, rim cylinders and interchangeable cores are handled by type: threaded cylinders unscrewed and re-pinned, cores swapped using a control key. Every cylinder is rebuilt to the same bitting and returned to its own door before we move on to the next.
5. Test every key in every lock. We test each key in each lock, from both sides of the door where the lock is double-sided, with the door open and then closed. We watch for stiffness, a bolt that drags or a latch that misses the strike. If something's off, we fix it before we leave.
6. Label, cut spares and record the key. We cut the number of spares you want, tag each set with a neutral code and write the bitting and keyway on your key card. Keep the card somewhere safe and apart from your keys. With it, we or any licensed locksmith can match future locks to the group.

Pricing factors

• Locks you own versus locks we supply. Hardware you supply is keyed for labor and a few pins, which makes shopping first a legitimate plan. Hardware we supply is priced separately from the keying work, so you can compare it with a retail pack and choose. Either way you see both numbers before approving anything.
• Groups and master levels. A single key for every lock is the simplest structure. Alike-by-group needs extra planning and more key blanks. Adding a master level calls for master pins, a keying chart and more bench time. We quote each structure separately so you can see what the extra convenience costs.
• Key count and key type. Every extra key is a small line item, but the number adds up in a rental or workplace. Decide up front how many sets you need, because adding keys later can mean another visit. Large-head and colored-head blanks cost a little extra and help in busy households.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in La Verne.

What not to do

• Putting everything on one key, including areas other people reach. A cleaner, contractor or tenant with access to the shed and the pool gate shouldn't also open your front door. Zone the property, then key alike inside each zone rather than across the whole place.
• Assuming any two locks from the same brand can be keyed alike. Keyways vary within a brand, and Kwikset SmartKey and conventional Kwikset cylinders don't share keys. Check the keyway first, or have us identify it, before you buy a second lock expecting it to join the first.
• Starting a DIY re-pin without a plug follower. Pull the plug out of a cylinder carelessly and the driver pins and springs scatter across the room. Rebuilding a five-pin chamber from memory is slow, and a wrong pin leaves a key that turns hard or not at all.

Advice before you book

• Write the key map once and keep it current. A one-page list of what each key opens, who holds it and when it was last checked saves arguments with tenants, employees and relatives. Review it whenever someone leaves, and ask us to re-pin the group if a key never came back.
• Match padlock sets by model, not just by brand. Different models from the same maker often use different keyways, so two padlocks can carry the same name and still not share a key. Buy the set as sold, or ask us to match them before you commit to a pile of mismatched ones.
• Leave the mail alone. A USPS cluster mailbox lock belongs to the postal service and can't be rekeyed to your house key. Private mailboxes and parcel lockers are different, and we can often match those. If you aren't sure whose box it is, ask your property manager first.
• Store the key code and bitting card away from your keys. Anyone holding the code can have a key cut, so it deserves the same care as a spare key. A fireproof box, a safe-deposit location or a password manager entry works better than a drawer in the kitchen.

Reaching La Verne

La Verne is about 31 miles from our San Bernardino base, roughly 35 minutes in light traffic via University Parkway to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Foothill Boulevard? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About La Verne: Residents renamed the town La Verne in 1917, shortly after Lord's death, ending a fight over the name that had started in 1912.

Planning a rekey in La Verne?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.