Skip to content
Julian's Locksmith

Covina, Los Angeles County

Change Key Without Replacing Lock: Rekey Options in Covina

Short answer: You can't always keep the old lock. If the cylinder is corroded, the bolt is cracked, the latch sticks or the lock is cheap and fused together, replacing it may cost little more than rekeying and will last longer. Julian's Locksmith will tell you honestly which side of that line your lock falls on when we look at it in Covina.

Change Key without Replacing Lock in Covina, CA — Rekeying pins and a lock cylinder

Something prompted this search: a lost key ring, a roommate who moved out with a copy, a contractor who still has your garage key, a tenant who left on bad terms, or a house you just bought. In every case the goal is the same: make the old key useless, keep the lock. You don't need new hardware for that, and it rarely takes more than one visit. In Covina, Julian's Locksmith can usually re-pin your existing locks the same day we first see them. We verify that you live there or own the place, quote the work in advance, and hand you new keys before we pack up.

What to know first in Covina

It helps to keep a short checklist of what survives a key change. Stays: the lock body, bolt, latch, strike plate, handle or lever, finish, door prep and mounting screws, plus any keypad, touchscreen or Bluetooth electronics on a smart lock. Changes: the key pins inside the cylinder and the key itself. Does not change automatically: keypad codes, app guest access, garage remotes and whatever neighbors or relatives are holding for you, which is why we review those with you at the end of the visit in Covina. The lock's strength also stays the same. Rekeying makes the old key useless but does not turn a weak lock into a strong one, so a budget deadbolt stays a budget deadbolt. If you want better security, we can swap in a higher-grade cylinder or deadbolt, and we'll price that separately so you can see the difference. A rekey is also a good moment to look over the door itself: strike plate screws, hinge screws and bolt throw all get a check before we pack up.

Work included on a typical visit

  • Door knobs and levers with keyed entry. A garage-entry or side door that still wears its original key lock is a common find in Covina. Rekeying those locks is quick, and it shuts out copies that circulated with the previous owner. We also check that the latch retracts fully, since a sticky latch can feel like a bad key.
  • Handlesets and decorative entry hardware. A heavy brass handleset from Baldwin or a similar maker is an investment, and re-pinning its cylinders is almost always the smarter move. We check that the lock body and trim are sound, and we take care with lacquered or living-finish brass, which marks easily when handled carelessly.
  • Mortise locks in older homes and storefronts. Mortise locks sit in a pocket cut into the edge of the door, with a cylinder threaded into the face. We unscrew the cylinder, re-pin it or swap it, and thread it back without touching the lock body. For older homes and original storefront doors, that saves hardware that can't easily be replaced.
  • Smart locks and keypads with a key override. A new key won't remove old keypad codes or app guests. If a former tenant or partner still has a code, changing the key leaves that door open electronically. While we're there, we show you how to review codes and revoke access in the app.
  • Padlocks, cam locks and cabinet locks. Cam locks on cabinets and mailboxes are often wafer locks that take a new cylinder cut to a new code rather than new pins. We can swap the cylinder, leaving the housing and door untouched. Postal Service cluster mailboxes are controlled by the Postal Service and aren't ours to change.

Local factors in Covina

Older Covina homes often have hardware worth keeping: a heavy brass entry set, a mortise lock original to the door, glass knobs with a deadbolt added later. Replacing those means new bores, filled holes and a different look. Changing the key keeps the character. We rekey or swap the cylinder, keep the trim, and tell you plainly if the lock body is tired enough to retire.

Apartment renters in Covina usually can't swap locks on their own, but landlords can, and many prefer a rekey: quicker than new hardware and easy between tenants. Civil Code section 1941.3 requires working deadbolts on main entry doors, and sections 1941.5 and 1941.6 require a landlord to change the locks within 24 hours of a written request in certain protective order situations. We work with managers to document everything.

Inland heat bakes locks. Brass expands, lubricants dry out, and plastic parts in some budget locks warp. Rekeying a sound lock is fine, but a heat-damaged one may deserve a cylinder swap or replacement. We check the plug, test the latch and use dry lubricant, because oil collects dust and bakes into gum on hot afternoons in Covina. A short check each spring catches sticking before summer makes it worse.

Common situations

  • A resident of Covina loses a key ring at the gym. There's no address on it, but the house key is on there, and she doesn't want to replace a handleset she loves. We rekey the deadbolt and latch to a new key, cut three copies, and the lost ring becomes a set of metal charms with no door to open.
  • After a breakup, a homeowner in Covina wants his ex's key to stop working but the hardware to stay. We verify ownership with ID and a utility bill, rekey the front and back deadbolts on the spot, and remind him that the keypad code and the garage opener are separate systems he still needs to change.
  • When a home health aide's contract ends, a family wants the parent's locks changed without fuss. The front door has a newer keypad lock and an older deadbolt. We rekey the deadbolt and the keypad's backup cylinder, update the codes with the family, and leave the parent with one easy-to-grip key and a short note of who holds which code.
  • A family has handed out the keypad code and the backup key for their smart deadbolt to a dozen people over the years. We rekey the backup cylinder, walk them through clearing old codes in the app and set two fresh ones. The hardware stays, the access list starts over, and the family finally knows exactly who can get in.

From your call to the finished job

  1. Describe the lock and why the key needs to change. Photos help more than descriptions. Snap the front of each lock, the edge of the door where the latch sits, and any stamp on the cylinder. We can often recognize the lock, say whether it's re-pinnable and quote the visit before we arrive.
  2. Show that you're allowed to change it. We check photo ID and something linking you to the property, such as a utility bill, deed, lease or business license. Tenants should have the landlord's written okay. We do this on every job, because changing a key is the same as deciding who gets in.
  3. Inspect the lock and choose rekey, cylinder swap or replace. Alignment problems often disguise themselves as lock problems. If the bolt drags because the door has shifted, we adjust the strike or hinge screws first. Then we decide whether the cylinder needs any work at all.
  4. Remove the cylinder and re-pin it. Where a cylinder can't be re-pinned, we fit a new one in the same keyway, or a different one if that's your goal. Interchangeable cores are swapped with a control key in seconds, and padlocks are opened at the work tray.
  5. Test the new key and the working door. We test the new key in each lock, in both directions, with the door open and then closed. We try the old key to confirm it no longer turns. Then we make sure the bolt throws fully into the strike and the latch catches smoothly.
  6. Hand over keys and check what's left. The last step is a question: who else needs a key? Family, a neighbor, a pet sitter? We cut them now so nobody has to be guessed at later. Then you approve the work, we settle up as quoted and leave the door as we found it, only with a new key.

How we quote the job

  • How many keyed cylinders you're changing. The count of keyholes drives time on site more than anything. A single front-door deadbolt is a quick job. A house with a front door, back door, garage entry, side gate and shed is several jobs in one visit. Tell us the total when you call and we quote accordingly.
  • Whether you have a working key. If one door's key is missing but the others work, say so. Rekeying the rest first and handling the stubborn lock separately keeps the quote clean. We'll tell you before starting what each part of the job involves and what it will add.
  • Timing, travel and add-on work. Travel across Covina is part of the service call, and early-morning or evening visits fit within our Sunday-through-Thursday hours. Friday and Saturday have the same hours as every other day. Bundling every lock into one visit keeps the total down, and booking ahead lets us bring the right parts.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Covina.

What to do before we arrive

  • Renting? Ask in writing. Most leases make the landlord responsible for locks, and some forbid changes. Get permission by email or text and keep it. California law sets specific duties for landlords on deadbolts and protective-order lock changes, so the conversation is worth having.
  • Keep a spare with someone trusted. Once the new keys exist, give one to a neighbor or relative and keep another in a lockbox you chose yourself. The best time to arrange backup is the day the new keys exist, not the night you're locked out.
  • Photograph the lock before you call. Get the keyhole side, the edge of the door where the latch sits and any name stamped on the cylinder face. Those three photos let us recognize the lock, tell you whether it can be rekeyed and quote the visit before we arrive.
  • Remember the electronics. A new key does nothing about keypad codes, app guests, garage remotes or a smart hub that still has an ex's phone on it. Make a list of every way into the house that isn't a key and change those at the same time.

What not to do

  • Hiring whoever quotes the lowest number on the phone. Teaser quotes tend to grow at the door once the technician says your lock can't be rekeyed. Ask for the company name, the license number and the all-in price. Check the license at search.dca.ca.gov first.
  • Assuming a new key cancels keypad codes, app guests or remotes. The key and the electronics are separate systems. Changing one leaves the other open. After a rekey, review every PIN, app invite and garage remote, and remove anyone who shouldn't have access.
  • Rekeying a rental without permission. A tenant who changes locks without the landlord's consent can break the lease and block emergency access. Ask in writing first. Landlords have their own obligations too, including working deadbolts on main entry doors under Civil Code section 1941.3.

Getting to Covina

Covina is about 39 miles from our San Bernardino base, roughly 45 minutes in light traffic via I-215 North to I-15 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Once the evening commute thins out on Azusa Avenue, drive times usually shrink. That makes an evening call before closing a practical option for non-urgent jobs that you couldn't fit into the workday.

About Covina: Covina was founded in 1884 by Joseph Swift Phillips on about 2,000 acres of the former Rancho La Puente and incorporated as a city on August 14, 1901.

NeighborhoodsKelby Park area, Wingate Park area, Village Oaks Drive and Jalapa Park area by I-10, Covina Park area, Hollenbeck Park area, Vincent
ZIP codes91722, 91723, 91724
Main routesI-210, I-10, SR-57, Azusa Avenue
From our San Bernardino baseabout 39 miles via I-215 North to I-15 South, then the Foothill Freeway (SR-210/I-210) West through Rancho Cucamonga, Upland, La Verne and San Dimas to the Citrus Avenue exit in Glendora and south on Citrus Avenue into downtown; Sunflower Avenue exit for Charter Oak and the east side, Azusa Avenue (SR-39) for the west side, or I-15 South to I-10 West through Pomona for the south end near IKEA

Planning a rekey in Covina?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.

Frequently asked questions

Can a Kwikset SmartKey lock get a new key without calling you?

Yes, if you have a working key and the learn tool. Kwikset's reset has you turn the current key a quarter turn, push the tool into the small hole on the face, then swap in the new key and turn it back. Follow the steps for your model. If the key is lost or the lock jams, call us and we'll reset or replace the cylinder.

What's the difference between changing the key and changing the cylinder?

Changing the key means re-pinning the cylinder you already have. Changing the cylinder means installing a different one in your existing lock, often because the old one is worn or you want a different keyway such as a restricted system. Both keep the lock body, handle and finish. A cylinder swap includes a part, but it gives you a fresh mechanism.

Can I change the key myself?

Sometimes. Kwikset SmartKey locks reset with a small learn tool and a working key, which most owners manage. Conventional locks need a plug follower, replacement pins and a key gauge, and the springs fly if the plug comes out wrong. A DIY kit suits a patient person with matching hardware. If you'd rather not risk a lock that won't turn, call us.

Which locks can't have the key changed?

Keypad-only locks without a key cylinder, combination padlocks, many cheap interior privacy sets, and locks with seized or damaged plugs. Some proprietary cylinders need the maker's parts. In those cases we can often swap the cylinder or recommend a replacement. We check each lock in Covina and say what's possible before starting, so you never pay for a rekey that can't work.

Will the lock look different or need new holes drilled?

No. When we change the key, the lock stays on the door exactly as it is: same handle, finish, bore and screw holes. Nothing needs drilling or filling. The only visible change is a new key. If we swap a cylinder, the face may differ slightly in finish, and we match it as closely as the maker's parts allow.

Is a rekeyed lock as secure as a new lock?

It's as secure as the lock was. Rekeying doesn't weaken a lock, but it doesn't strengthen it either. A good deadbolt stays good, and a cheap one stays cheap. What improves is key control: old and stray copies stop working. If you want better resistance to force or picking, we can swap in a higher-grade cylinder or deadbolt, priced separately.

How far is Covina from your base?

Covina is about 39 miles from our San Bernardino base, roughly 45 minutes in light traffic. Arrival time depends on traffic and on the job the technician is finishing, so we give you an estimate on the phone before you commit.

Change Key without Replacing Lock in nearby cities

From the blog

Call now(951) 903-3193

Daily 6:30am–11:30pm