Keyed Alike Locks for Citrus Homes, Rentals and Businesses

How this works in Citrus

A pin tumbler cylinder holds a column of small pins in each of five or six chambers. The right key lifts every column to the same height, creating a clean line, called the shear line, that lets the plug turn. Keyed alike locks are just cylinders whose pin stacks were built to the same cut depths, which locksmiths call a bitting. Kwikset's KW1 keyway offers seven cut depths; Schlage's SC1 offers ten with finer steps, so the two brands aren't interchangeable, and neither are two different keyways from the same maker. Matching locks means choosing a bitting, then replacing the key pins inside each plug with sizes that fit it. In Citrus we do that on site: the plug comes out over a plug follower so the springs and driver pins stay put, we measure and install the new key pins, and the plug goes back in. Whether you supply a working key to copy or let us choose a fresh bitting, the result is the same: one key, several locks, no new hardware.

What we can do on-site

• Rekeying locks you've just bought. Retail multi-packs sometimes ship keyed different, and online orders get mixed up more often than you'd think. Leave the locks in their boxes until we arrive. We open each cylinder, change the pins and prove the finished set works with one key, which beats returning hardware and waiting on a replacement shipment.
• Alike by group, different between groups. Most Citrus households want a short list of keys, not a single one. We pin the family's daily doors to Key A and the shared spaces to Key B, so a dog walker or gardener never touches the house. We label both sets and write down which locks belong to which group.
• Padlocks, gate locks and outbuildings. Padlocks that came with the property often have no keys at all. We open them, assess whether the body is worth saving, and either re-pin it to your new gate key or replace it. Gate hasps, chain loops and sliding bolts get checked at the same time, since a padlock is only as strong as what it hangs on.
• Adding a master key above a keyed alike group. If you may add a master key later, say so now. Planning cylinders with master pins from the start means future locks join without redoing the old ones. Some budget locks and padlocks can't take master pins at all, so we keep them outside the master structure.
• New doors, remodels and ADUs. Builders usually key a project with a construction key, then change it at handover. If you've just closed on a new home, ask us to set a fresh combination for every exterior door at once, alike or grouped, so the only keys that exist are the ones you hold.

What's different about Citrus

Older Citrus homes carry a lifetime of replaced hardware: a mortise set at the front from the 1950s, a deadbolt added in the nineties, a brass knob at the back. Their keyways rarely match, so the first job is mapping them. We re-pin what shares a keyway to one bitting, swap a cylinder where an old mortise body can take a modern one, and replace the oddballs, keeping original handles wherever we can.

Family homes in Citrus usually have a front door, back door, garage entry and side gate, and a household of people with different needs. Keyed alike on the daily doors makes life easy for school bags and busy pockets. A separate key for the garage tool cabinet or the shed keeps small hands and visiting contractors away from what shouldn't be touched.

Common situations

• The owner of a duplex off Armstead Street inherits it with no key records. After we confirm her ownership with the deed, we inventory eight cylinders, key each unit's front and back doors to its own bitting, and pin the shared laundry closet to a master she holds. Each tenant gets keys for their half, and she gets a one-page map.
• A host with a short-term rental wants guests to have one key for the front and patio doors, and nothing else. The owner's storage closet and the side-yard gate get a second key that stays with the host and the cleaner. We pin both groups, cut spare guest keys and show the host how to track them between stays.
• A buyer closes on a newly built house near Emanate Health Foothill Presbyterian Hospital. The front deadbolt and handleset share a key, the back slider and garage entry use two others, and the builder's crews carried copies of all three. We re-pin all four cylinders to one new combination, take the construction keys out of play, and cut the family three new keys, so nobody from the build crew can still walk in.
• The board of a small community keeps losing track of keys. We key the clubhouse and pool-equipment room on a board key, the irrigation room and trash enclosure on a maintenance key, and add a master for the management company. Volunteers sign for the keys they hold, and a missing one means re-pinning only its group.

How the visit works

1. Tell us what you have and what you want alike. Before the visit, note which locks still have working keys and which are lost or stuck. Mention anything unusual: a smart lock, a restricted keyway, an old mortise set. We'll ask about the building too, because a duplex and a single-family home are keyed very differently.
2. Confirm you're authorized. Ownership checks protect you more than us. If a former partner or tenant called a locksmith claiming your address, the same check would stop them. We compare your ID to a bill, a lease or a deed, confirm who is authorized, and only then pull the first cylinder.
3. Choose the grouping and the key. If you want to add a lock to the group next year, say so. We note the keyway, the bitting and the key blank so future locks can join. We'll also tell you which of your locks cannot join, because of keyway or construction, before any parts come apart.
4. Re-pin or match each cylinder. Mortise cylinders, rim cylinders and interchangeable cores are handled by type: threaded cylinders unscrewed and re-pinned, cores swapped using a control key. Every cylinder is rebuilt to the same bitting and returned to its own door before we move on to the next.
5. Test every key in every lock. Testing includes the dull checks: closing the door and throwing the deadbolt fully, confirming the knob latch retracts. Then we cycle every cut key through every cylinder one by one, so a poorly cut spare is found in the driveway, not on a rushed morning.
6. Label, cut spares and record the key. We cut the number of spares you want, tag each set with a neutral code and write the bitting and keyway on your key card. Keep the card somewhere safe and apart from your keys. With it, we or any licensed locksmith can match future locks to the group.

Pricing factors

• How many cylinders go on the key. The more cylinders in the group, the more time on site, and pricing follows the count more than anything else. Four deadbolts and a padlock quote differently from a fourplex. Give us an honest count, including the gate and the shed, and we quote it before starting.
• Brand and keyway compatibility. Locks that share a keyway can be re-pinned to a common key, which is the most economical route. Mixed brands can't, so one of them has to be replaced or swapped to a compatible cylinder. That cost, parts plus labor, is the main swing in a keyed alike quote, and we flag it up front.
• Key count and key type. Keys for a standard five-pin cylinder are straightforward. Keys for six-pin, restricted or sidebar systems need special blanks and sometimes factory authorization, which affects cost and turnaround. If a lock uses one, we say so when you call, so the quote already includes it.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Citrus.

Practical tips before you call

• Buy locks from one brand and one product line when you can. Matching packs share keyways and finishes, and a family of Schlage or Kwikset locks will always join each other. Mixing a Schlage deadbolt with a Kwikset knob looks harmless on the shelf and creates a problem the moment you want one key.
• Test the key in every lock before you install anything. Unbox the new locks, slide the key into each one and turn it, making sure the bolt throws and retracts. A defective cylinder or a mixed-up pack is far easier to exchange before the door has been drilled and painted.
• Keep one fully working spare in a second location. With one key for everything, losing it leaves you outside every door at once. A spare with a relative, a work locker or a small key safe turns a bad afternoon into an inconvenience. Test that spare once a year.
• Leave the mail alone. A USPS cluster mailbox lock belongs to the postal service and can't be rekeyed to your house key. Private mailboxes and parcel lockers are different, and we can often match those. If you aren't sure whose box it is, ask your property manager first.

What not to do

• Putting everything on one key, including areas other people reach. A cleaner, contractor or tenant with access to the shed and the pool gate shouldn't also open your front door. Zone the property, then key alike inside each zone rather than across the whole place.
• Treating a keyed alike package as a security upgrade. Packaging describes convenience, not strength. A budget lock keyed alike is still a budget lock, and a pack's combination may be shared with other buyers somewhere. Consider a fresh combination for any lock guarding something valuable.
• Ignoring the keypad and app side of a smart lock. Keying the backup cylinder alike doesn't remove old PINs, shared guest codes or app invites. When the keying is finished, review all of those too, or your tidy one-key system keeps a back door open electronically.

Getting to Citrus

Citrus is about 37 miles from our San Bernardino base, roughly 42 minutes in light traffic via Palm Avenue to I-215 North, I-15 South at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Homes and businesses just off Alosta Avenue are routine stops for us. Give the suite or unit number and any gate instructions, and say whether the van can park out front or should pull into a side lot.

About Citrus: Most Citrus students attend Azusa Unified schools, while parts of the community fall within Glendora Unified and Covina-Valley Unified.

Planning a rekey in Citrus?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.