A Repeatable Tenant Turnover Rekey for Bradbury Properties

What to know first in Bradbury

Where the rekey sits in the make-ready decides whether it holds anything up. Cylinders dislike paint, drywall dust and adhesive, so the cleanest spot is after painting, touch-ups and the deep clean, and before the final inspection. If crews need access during the turn, hand them a temporary key and make the rekey the last lock-related step. Schedule it for the day the unit is otherwise ready rather than the day it becomes vacant, because lock work can usually be done in an empty, finished unit with almost no setup. Build the slot into your checklist with a name, such as lock reset, and a clear owner. When the step is on the board, it gets done. When it lives in someone's head, it gets skipped during a busy week. A well-placed slot also protects finished work, because nobody wants a technician removing hardware around fresh paint on move-in day. Treat the lock slot like any other trade's.

What we can do on-site

• Re-pinning to a fresh bitting on the same keyway. The new key cut is chosen deliberately, not randomly. We change as many pin positions as the lock allows, so the old key doesn't come close to fitting, and we avoid recent cuts you've used elsewhere in the building. Details like that sound fussy, but they make the result of a rekey trustworthy.
• Interchangeable core swaps for fast turns. Interchangeable cores shine in larger communities and student housing, where dozens of units turn in the same short window. A maintenance tech with a control key swaps cores in seconds and sends the removed ones to be re-pinned in batch. We'll tell you honestly when your unit count is too small to justify the hardware.
• Rekeying units on a master key system. Some buildings have grown a patchwork of masters over the years. If yours has, a turnover rekey is a good moment to document what exists, even if you don't rebuild it. We record the master cut, the unit cut and the keyway for each door we touch, so a future system upgrade starts from facts.
• Batching units on a route day. Batching works only when access is organized. Provide unit numbers, the lockbox or office key arrangement, and a contact who can answer questions on site. If gates, elevators or parking restrictions apply, tell us. We'd rather spend a few minutes on logistics than waste time in a hallway looking for the right door.
• Hot turns: same-day move-out and move-in. Hot turns reward preparation. Have the unit accessible, the cleaners out of the doorway and the lock count confirmed. We bring the pins and blanks for the brands you named, so the visit doesn't stall on a missing part. If we find a lock that can't be rekeyed, we tell you right then so you can decide quickly.

Local factors in Bradbury

Gated communities add access steps to any turn: a guard list, a gate code for the vendor van, sometimes HOA rules about service hours or parking. Send us the entry procedure with the unit list. We rekey the unit; the association handles gate remotes and amenity keys. A turn checklist that names those separate owners prevents the usual missed fob.

Inland heat shortens the life of lock hardware in rental units: finishes fade, plastic parts crack, and warped doors strain latches. A turn is a chance to inspect every bolt and strike while the unit is empty. We rekey the cylinders, check how each latch engages, and flag the units that need weatherstripping or adjustment so the next resident isn't the one to find out.

Senior communities and age-restricted rentals turn less often, but each turn deserves care. Caregivers, family and aides often hold keys, and some residents use lockboxes for emergency access. The rekey should address all of those, and the new resident should be told who has keys. Lever handles and keypad entry can be worth considering at turn for residents with limited hand strength.

Example situations

• The painters need access on Tuesday, the carpet crew on Wednesday and the new resident arrives Friday. The manager hands the crews a temporary key and books our rekey for Thursday, after the work is done and before the final inspection. The unit is finished in order, the permanent keys are cut last, and nobody holding a contractor's key can walk back in over the weekend.
• A model unit is used for self-showings with a keypad deadbolt. Every few weeks the codes pile up from agents, photographers and applicants. At each turn we help the manager clear the codes, check the batteries and rekey the backup cylinder. The unit is then ready for the next resident, and the manager sets codes to expire so the pile doesn't grow back.
• A maintenance tech tries a pin kit on a unit at the end of a long day and leaves one cylinder with a deadbolt that now binds. The manager calls us before the new resident arrives. We open the cylinder, find a pin that didn't seat, correct it and test every key. The manager then adds a line to the checklist: test the old key and the new key at every door before closing the work order.
• Student housing flips almost all at once. Imagine a complex near San Gabriel Mountains with leases ending the same week in spring and new groups arriving in late summer. The manager sends a unit list weeks ahead so we can plan route days across the gap. We make no promise of dozens of units in one day, but with notice we can sequence them and keep the lock step from becoming the bottleneck.

From your call to the finished job

1. Add the lock step to your turn checklist. Start on your side. Name the step something specific, like lock reset, assign an owner and place it after paint, clean and repairs but before final inspection. Add a field for the date it was done. When the step lives on the checklist, it stops being forgotten during busy weeks.
2. Send the turn list. If this is your first turn with us, expect a few extra questions about the building. We might ask for master key bitting records, the keyway used and past rekey dates. After the first round, a short list per turn is enough, because the building's profile is already in your own file.
3. Quote and slot the visit. Give us the deadline, not just the date you'd like. If the new resident arrives Friday, the rekey has to happen by Thursday at the latest. Knowing the true deadline lets us choose the day that leaves breathing room for surprises.
4. Authorization and access. Access is the quiet source of delay. Tell us who meets us, where the lockbox or office keys are, how to reach gates and elevators, and where to park the van. A contact who can answer questions on site keeps the batch moving and lets us work through units in order.
5. Rekey, cut and test, unit by unit. We keep a running sheet as we go: unit number, door, brand, number of keys cut and anything unusual. If a lock needs replacement, it goes on the sheet with a photo, and the quote for that item comes separately. You see the same notes we do, so there are no surprises on the invoice.
6. Close out with a key log and an invoice by unit. Close the loop in your own records the same day: update the key log, note the rekey date on the unit file and file the work sheet. If your software tracks work orders, attach our sheet. A clean record at close-out is what makes the next turn quick.

How we quote the job

• Cylinders per unit and units per trip. Travel is part of every mobile job, and we spread it across the units in a visit. Two vacancies in the same building cost less in travel than two on opposite sides of Bradbury. If you have flexibility on the day, tell us, because a route that groups nearby properties keeps your total lower.
• Key counts and key type. Standard blanks are inexpensive and can be copied at any hardware store. Restricted-keyway keys cost more but can't be duplicated at a typical kiosk. For properties with frequent turnover and copy concerns, the extra cost of restricted keys can be worth it. We explain what's available for your hardware.
• Lead time and the vacancy window. Lead time shapes both price and options. A planned visit booked a few days ahead inside our regular hours is easier to schedule than a same-day request. We're open every day, 6:30 a.m. to 11:30 p.m. That includes Fridays and Saturdays, so Friday and weekend turns can be planned like any other day.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Bradbury.

Common errors that cost time and money

• Waiting for a problem to prompt the rekey. A turn without a lock step becomes a policy by accident, and the first time it matters is the day a former resident's key shows up in a complaint. Decide once, write it down and follow it.
• Skipping the old-key test. A cylinder that was pinned incorrectly can accept both keys, and nobody finds out until a dispute. Testing the old key at every door takes seconds and proves the work was done. Write the result on the work sheet so the proof outlasts your memory.
• Rekeying before the make-ready is done. Paint, dust and adhesive end up in the cylinders, and a new key can get stiff within weeks. Contractors who already hold cut keys keep access, too. Schedule the lock step after the last trade and before the final inspection.

What to do before we arrive

• Ask residents to return all keys at move-out inspection and sign a key return form. Even though you will rekey regardless, the form creates a record and sets expectations. It also saves arguments later about what was handed back and when.
• Standardize on a single keyway per property whenever you replace hardware. Mixed brands are the main reason turns take longer than expected. Replace the odd lock out during a turn, not in a panic during a repair call, and your key rings will shrink over time.
• Test with the old key too. It's easy to confirm that the new key works and forget to prove the old one fails. A quick trial at each door is what turns 'we rekeyed' into 'we verified.' Write 'old key tested' on your checklist so it isn't skipped.
• Put the tenant turnover rekey on the move-out checklist and the turn board with its own name, such as lock reset. A task with a name and an owner gets done; a task everyone assumes someone else did gets skipped. Review the board each week for units that are ready except for locks.

Reaching Bradbury

Bradbury is about 44 miles from our San Bernardino base, roughly 48 minutes in light traffic via I-215 South to SR-210 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Traffic matters more than mileage. We check conditions on Royal Oaks Drive and its connecting routes before quoting you a time, and we don't pretend a long drive through heavy congestion is a short one.

About Bradbury: The city is named for Louis Leonard Bradbury, a mining investor who acquired about 2,750 acres of the former Rancho Azusa de Duarte.

Planning a rekey in Bradbury?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.