Toyota Yaris Key Replacement

Yaris keys by generation

For 2019 the Yaris iA was renamed Yaris sedan, and for 2020 a Mazda2-based Yaris hatchback replaced the Toyota-built one, so every Yaris of these years is Mazda engineering with push-button start. Both use the four-button Mazda smart fob (FCC WAZSKE13D01) with lock, unlock, trunk and panic buttons, a CR2025 battery and an emergency blade inside. Toyota ended US Yaris sales in mid-2020, so 2020 is the final model year. These cars follow Mazda's rules rather than Toyota's. A new or professionally unlocked fob is registered through the OBD-II port with a programmer, there is no on-board method, and the emergency blade is cut to the door lock separately. Losing every fob is handled the same way over OBD-II on many cars, though the result depends on the car's software level. We bring Mazda-compatible fobs rather than Toyota parts for these cars.

Two different cars wore the Yaris name in these years. The Toyota-built hatchback keeps its turn-key ignition and uses remote-head keys with a 128-bit H chip (FCC HYQ12BBY or HYQ12BDC). The Yaris iA sedan, a Mazda2 built by Mazda in Mexico and formerly sold as the Scion iA, arrived for 2017 with push-button start and a four-button Mazda smart fob (FCC WAZSKE13D01, CR2025) with an emergency blade. Body style tells you which system you have: hatchback means a Toyota key, sedan means a Mazda fob. Hatchback keys are registered over OBD-II, with an emulator step if every key is lost on the H-chip cars. The iA follows Mazda smart-key rules: a new or professionally unlocked fob is registered with a programmer through the OBD-II port, and its emergency blade is cut separately. On the iA, all-keys-lost also runs over OBD-II with a programmer on many cars, though dealer software updates can make some cars reject aftermarket tools.

The redesigned Toyota-built Yaris hatchback keeps a turn-key ignition. Its keys use Toyota's 80-bit G chip, identified by a G on the blade, and the remote-head version has three buttons and a CR2016 (FCC HYQ12BBY). Plain transponder keys without buttons are available as spares. Supplier notes say to check the chip on 2015 cars, since Toyota's 128-bit H chip was arriving about then, and the H-chip hatchbacks are covered in the next entry. G-chip keys are registered over OBD-II, and with a working master many cars also allow Toyota's on-board add. All-keys-lost on a G-chip Yaris is an immobilizer reset with a built-in security wait, after which every key you keep is registered fresh. The remote-head key's buttons pair as a separate step, and we read your existing key or check the blade letter first so we program the right chip type.

Yaris hatchbacks and sedans of 2007-2011 use a turn-key ignition. Key catalogs list Toyota's 4D-67 dot transponder for these cars, and some 2010-2011 cars may carry the newer G chip. Where keyless entry was ordered, it comes as a three-button remote-head key (FCC MOZB41TG, CR2016) shared with the Scion tC and xD of the period. Plain transponder keys work as spares, and the blade is Toyota's TR47 profile. We cut a new key by code or from your existing key and register its chip through the OBD-II port; many of these cars also accept Toyota's on-board add with a working master. If every key is lost, the immobilizer is reset over OBD-II after a timed security wait, and all keys are registered fresh. The remote-head key's buttons pair as a separate step.

Toyota key security

Toyota phased in transponder immobilizers model by model, so two Toyotas from the same year can need very different keys. Starting with the 1998 model year, the Camry, Avalon, 4Runner, Sienna and Land Cruiser used a fixed-code Texas 4C chip, while US Corollas, the Echo and other economy models kept plain mechanical keys into the mid-2000s. Between 2003 and 2005, depending on the model, the encrypted Texas 4D-67 chip took over. Around 2010 came the 80-bit G chip, and from about 2014 the 128-bit H chip, also called 8A. Many of these later keys carry a stamped D, G or H on the blade. Smart keys spread to US Toyotas with cars like the 2004 Prius, 2005 Avalon and 2007 Camry, moved to 128-bit fobs in the 2010s, and since about 2022 Toyota has used a newer generation: Texas 8A BA-type fobs in models such as the bZ4X and Crown, and NXP Hitag AES, often called 4A, in the Corolla, Corolla Cross and 2025 Camry. Partner-built cars follow their partner's rules, so the 86 and GR86 use Subaru systems and the GR Supra uses BMW's. The letter on your blade, the FCC ID on your fob and your VIN tell us which system we are working with.

Most Toyota key work runs through the OBD-II port with professional equipment. On 4C cars, a spare can often be cloned from a working key onto a new chip, while 4D-67, G and H keys are registered to the immobilizer itself. Some 4D-67 and G-chip Toyotas also accept an on-board add when you have a working black master key, and Toyota's door-and-key routine pairs most separate remotes and remote-head buttons without a computer. Smart keys always need a programmer. Many 2004-2020 fobs can be professionally reset and reused, but fobs from the newest systems may not be reusable at all. Blades matter too: most Toyota chip and remote-head keys use the TR47 profile, while smart keys hide a laser-cut emergency blade that has to be cut so you can open the driver's door when the fob dies. Before any of this, we check your ID and registration, and we quote the whole job before starting.

All Yaris keys lost

Losing every Toyota key is solvable in most cases, but the method depends on the system. On 4D-67 and G-chip cars, our equipment resets the immobilizer through OBD-II, usually after a built-in security wait, and then registers new keys. H-chip and 8A smart key cars usually need an emulator or a direct connection at the immobilizer or smart key box, which can mean removing a panel under the dash. Older 4C cars and early smart key systems may need the module's memory read on the bench. Toyota's newest BA and Hitag AES systems have aftermarket all-keys-lost coverage on many models but not all, and the BMW-built GR Supra is a dealer job. We confirm your VIN before driving out, verify ID and ownership on site, and program at least two keys.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Toyota Yaris requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your Yaris and your schedule.

How the job works

1. Identify the exact key your Yaris uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Toyota Yaris keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your Yaris, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a Yaris key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your Yaris came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Programming complexity and security access. Two cars with similar-looking keys can program very differently. Newer platforms often guard key programming behind encrypted access or paid credentials, while older systems allow straightforward OBD-II pairing. We check the exact procedure for your VIN before quoting, so the number reflects the real work involved.
• Travel, timing and extra repairs. Sometimes a key problem is really a lock problem: an ignition that won't turn even with the right key, or a door cylinder that has been jammed for years. Fixing those is separate work. We point them out, explain the options, and quote the whole job up front so the bill holds no surprises.

Yaris key types explained

• Transponder (chip) key. A transponder key carries a small chip in its head, usually a glass capsule or a carbon wafer, with no battery of its own. When you turn the key in a 2020 Toyota Yaris that uses one, an antenna ring around the ignition energizes the chip and asks for its code. If the answer matches what the immobilizer has stored, the engine is allowed to run. If it doesn't, you get the classic symptoms: the engine cranks but won't fire, or it fires and dies after a second, and the security light on the dash flashes or stays lit. That's why a perfectly cut copy without a programmed chip will open the doors but won't start the car.
• Remote head key. A remote-head key puts two separate systems in one piece: a cut blade with a transponder chip that the immobilizer reads, and a small circuit board with buttons that signals the body control module to work the door locks. On a 2020 Toyota Yaris with this style of key, each side is programmed separately. That explains some confusing failures. If the remote stops working but the car still starts, the problem is usually the battery or the remote board. If the buttons work but the engine won't run, look at the chip side. Knowing which half failed tells us whether you need a repair, a reprogram or a whole new key.
• Smart proximity key (push-to-start). A smart or proximity key lets a 2020 Toyota Yaris open when you touch the door handle and start with a push of a button while the fob stays in your pocket or bag. Antennas in the doors and cabin send out a low-frequency wake-up signal; the fob answers on a higher radio frequency with an encrypted reply, and the car only allows a start once it confirms the fob is inside. When the fob battery is weak, that conversation fails, which is why most designs include a backup: hold the fob against the start button or set it in a designated pocket. The owner's manual shows where, and it's worth checking before you need it.

Why a spare key pays for itself

• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.

Tips from a mobile locksmith

• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.

Common Toyota key problems

• Toyota chip keys are easy to mix up. Many later keys are stamped near the head with D for the 4D-67 chip, G for the 80-bit G chip or H for the 128-bit H chip, and a key ordered by looks alone often won't program.
• Toyota fob batteries vary by family. The 2009-2012 Camry-style smart key takes a CR1632, many 2016-2022 fobs take a CR2032, and larger 2022-and-later fobs take a CR2450. Most remote-head keys use a CR2016, while older separate remotes use a CR2032.
• If a smart key battery dies, most push-button Toyotas will still start. Press the brake and touch the Toyota emblem side of the fob to the start button; the car reads the chip directly, so a flat cell isn't a lockout.
• Many newer Toyota fobs have a battery-saving mode, switched on by holding lock and pressing unlock twice. Afterward the car ignores the fob in your pocket until a button is pressed, which owners often mistake for a dead key.
• Toyota smart keys look alike across models but carry different FCC IDs and board numbers. Suppliers warn, for example, that a 2007-2010 fob with an E board won't substitute for one with a numbered 0140 board.
• Remote-head keys take a beating on a key ring: the plastic head cracks and the rubber button pad tears. The chip and circuit board usually survive, so a new shell and freshly cut blade often fix the problem.
• Older Toyotas came with black master keys and gray valet keys. The valet key starts the car but can't be used for Toyota's on-board method of adding keys, so a car with only valet keys left needs programming equipment.
• A used Toyota smart key bought online is already locked to its first car. Many 2004-2020 fobs can be professionally reset for reuse, but fobs from the newest systems may not be resettable, so buying used can waste money.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.