2019 Toyota 86 / GR86 Key Replacement

2019 86 / GR86 key specs

Most Toyota 86s use a four-button remote-head key (lock, unlock, trunk and panic) with an 80-bit G chip, the same Subaru-supplied key used on the Scion FR-S. Supplier catalogs also list a four-button proximity smart key with push-button start for 2018-2020 cars. Check the dash before ordering: a start button means the smart key, while a key slot means the remote-head key or a plain G-chip key.

What's specific to the 2019 86 / GR86

The 2019 Toyota 86 / GR86 is the third of 4 model years in the 86 / GR86 ZN6 Toyota 86 (1st generation) (2017–2020), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2019 Toyota 86 / GR86 is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2019 Toyota 86 / GR86

• Remote head key. Remote-head keys look similar across many vehicles, but the electronics inside are not interchangeable. Getting the right one for a Toyota 86 / GR86 means matching the FCC ID and part number printed on the back or inside the case, the operating frequency, which is commonly 315 MHz on US-market cars, the transponder type, and the button layout. A trim with remote start or a power liftgate may use a four- or five-button version where a base trim uses three. We check those details against your VIN and your existing key, if you have one, before cutting the blade. A wrong match can look perfect and still refuse to program.
• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2019 Toyota 86 / GR86 is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.

How the Toyota immobilizer works on the 86 / GR86

Toyota phased in transponder immobilizers model by model, so two Toyotas from the same year can need very different keys. Starting with the 1998 model year, the Camry, Avalon, 4Runner, Sienna and Land Cruiser used a fixed-code Texas 4C chip, while US Corollas, the Echo and other economy models kept plain mechanical keys into the mid-2000s. Between 2003 and 2005, depending on the model, the encrypted Texas 4D-67 chip took over. Around 2010 came the 80-bit G chip, and from about 2014 the 128-bit H chip, also called 8A. Many of these later keys carry a stamped D, G or H on the blade. Smart keys spread to US Toyotas with cars like the 2004 Prius, 2005 Avalon and 2007 Camry, moved to 128-bit fobs in the 2010s, and since about 2022 Toyota has used a newer generation: Texas 8A BA-type fobs in models such as the bZ4X and Crown, and NXP Hitag AES, often called 4A, in the Corolla, Corolla Cross and 2025 Camry. Partner-built cars follow their partner's rules, so the 86 and GR86 use Subaru systems and the GR Supra uses BMW's. The letter on your blade, the FCC ID on your fob and your VIN tell us which system we are working with.

• The remote-head key, Subaru part SU003-05282 with FCC ID HYQ12BEL, is shared between the Scion FR-S and the Toyota 86.
• Smart keys listed for 2018-2020 Toyota 86s use FCC ID HYQ14AHP and Subaru part number SU003-07686.
• There was no 2021 US model; the 86 name ended with the 2020 model year.

Programming a 2019 86 / GR86 key

The 86 needs equipment that supports this Subaru-built Toyota platform. Adding a key alongside a working one is done through the OBD-II port, and the remote buttons are set up in the same visit. All-keys-lost requires a security code exchange that current aftermarket tools cover on most cars, though it takes longer, and an occasional car may need the dealer. Blades are cut by code or decoded from the driver's door lock.

Spare keys are routine. All-keys-lost uses a PIN-protected procedure, so we confirm coverage by VIN before the visit.

Lost every key to your 86 / GR86?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. If the car is locked, we open it with non-destructive tools such as an inflatable wedge and a long-reach rod, or by picking the door lock. Some vehicles need a careful approach to avoid triggering the alarm, which can interfere with programming later.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Toyota 86 / GR86 requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• A spare turns a future all-keys-lost emergency into a simple add-a-key job. With one working key in hand, programming is quicker, and the chip or fob can often be paired without decoding locks or reading modules, which keeps the cost of a lost key far lower.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.

Dealer or mobile locksmith?

The biggest difference between a dealership and a mobile locksmith is where the work happens. A dealer programs keys in its service bay, so if every key is lost, the car usually has to be towed there, and you work around the service department's schedule and the time it takes to order a key by VIN. Julian's Locksmith brings the cutting machine, key blanks and programming equipment to the car, whether it sits in your driveway, a workplace lot or a parking structure. For a 2019 Toyota 86 / GR86 we can program on-site, that means no tow and no shuttle rides back and forth. The trade-off is real, though: on vehicles where only the dealer can program keys, a tow or appointment may still be necessary, and we'll say so before you spend anything on our visit.

86 / GR86 key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare replacement at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

How the job works

1. Identify the exact key your 86 / GR86 uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Toyota 86 / GR86 keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Toyota system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of an 86 / GR86 key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your 86 / GR86 came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• Factory or aftermarket parts. Some owners want an exact factory match; others just want a dependable key that starts the car. Both are reasonable choices. The part you pick changes the quote, so we lay out the options side by side, with the trade-offs in fit, button feel and long-term durability, before you decide.
• Programming complexity and security access. Some immobilizers accept a new key with a few on-board steps. Others need a PIN code, a timed security wait, manufacturer online access, or removing a module to read its data. Every extra layer of security on the Toyota system adds equipment time and labor to the job.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Toyota key problems

• Toyota fob batteries vary by family. The 2009-2012 Camry-style smart key takes a CR1632, many 2016-2022 fobs take a CR2032, and larger 2022-and-later fobs take a CR2450. Most remote-head keys use a CR2016, while older separate remotes use a CR2032.
• Toyota smart keys look alike across models but carry different FCC IDs and board numbers. Suppliers warn, for example, that a 2007-2010 fob with an E board won't substitute for one with a numbered 0140 board.
• Remote-head keys take a beating on a key ring: the plastic head cracks and the rubber button pad tears. The chip and circuit board usually survive, so a new shell and freshly cut blade often fix the problem.

Tips from a mobile locksmith

• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2019 Toyota 86 / GR86 key?

Don't wait until the last key disappears. If your Toyota 86 / GR86 is down to one key, or the one you have is falling apart, call (951) 903-3193. We're a licensed California locksmith, license LCO7891, serving Southern California and the rest of the Inland Empire with mobile car key service every day from 6:30 a.m. to 11:30 p.m.