2020 Mercedes-Benz E-Class Key Replacement

2020 E-Class key specs

Every W213 E-Class starts with a button, and the fob only needs to be in the car. Sedans and wagons arrived for 2017, and the C238 coupe and A238 cabriolet followed for 2018. Versions include the E300, E350, E400, E450, AMG E43, AMG E53 and AMG E63, all with the same dealer-supplied keys. Touch entry at the door handles came with Keyless-Go, and the fob holds an emergency key for the driver's door.

What's specific to the 2020 E-Class

The 2020 Mercedes-Benz E-Class is the fourth of 7 model years in the E-Class W213 (2017–2023), so it shares its key system with the rest of that run, which makes replacement parts easy to source. A 2020 Mercedes-Benz E-Class is about 6 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Smart-key cars like the 2020 E-Class can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2020 Mercedes-Benz E-Class

• Smart proximity key (push-to-start). A smart or proximity key lets a 2020 Mercedes-Benz E-Class open when you touch the door handle and start with a push of a button while the fob stays in your pocket or bag. Antennas in the doors and cabin send out a low-frequency wake-up signal; the fob answers on a higher radio frequency with an encrypted reply, and the car only allows a start once it confirms the fob is inside. When the fob battery is weak, that conversation fails, which is why most designs include a backup: hold the fob against the start button or set it in a designated pocket. The owner's manual shows where, and it's worth checking before you need it.

How the Mercedes-Benz immobilizer works on the E-Class

Mercedes-Benz calls its immobilizer the Drive Authorization System, and for key work it helps to sort the cars into three eras. The oldest models we cover, such as the 2000-2002 E-Class, the last W202 C-Class and the first CLK, use a key with remote buttons in its head and an HU64 two-track blade that turns a conventional ignition lock while the immobilizer checks electronics inside the key. The next era, known in the trade as FBS3 or DAS 3, came to the US on the S-Class and CL around 2000 and spread to nearly every model within a few years. Its key is a fob that plugs into an electronic ignition switch and identifies itself by infrared: chrome-bodied at first, then the familiar black fob with chrome sides. Keyless-Go let many of these cars open and start with the fob left in a pocket. Around 2014 and 2015, Mercedes began moving models to FBS4, and push-button start gradually became standard. FBS4 keys are produced by Mercedes-Benz for one VIN, which is why most newer cars mean a dealer order.

• A 2017 E-Class coupe or cabriolet still uses the previous generation's key, while the 2017 sedan uses this one.
• The E-Class coupe and cabriolet were replaced by the CLE after the 2023 model year.
• If Mercedes me connect is active, the app can open the doors remotely, which may solve a lockout without a visit.

Getting a 2020 E-Class key from the dealer

W213 keys are built by Mercedes-Benz for the individual VIN and supplied through a dealer once you show ID and proof of ownership, and they arrive ready to work. We don't originate keys for this generation. What we offer is the rest: opening a locked E-Class without scratches, checking whether a fob that went quiet only needs a new cell, and getting the emergency key out so the car can be secured.

W213 keys are ordered by VIN from a Mercedes-Benz dealer; we help with lockouts and fob troubleshooting.

How we help when the key must come from Mercedes-Benz

With every key gone, the era matters again. On many FBS3 cars, we remove the electronic ignition switch, read it on the bench and calculate a new key from the car's own data, with no working key to copy. That takes longer than making a spare, and a few switches or control units won't cooperate, but it often saves a tow to the dealer. For FBS4 cars and for the oldest pre-FBS3 models, the dependable route is a key built by Mercedes-Benz for your VIN and ordered through a dealer after you show ID and proof of ownership. While that order is filled, we can open the car without damage so you can reach documents or belongings, and a dealer can block the lost keys so they no longer start the car.

1. Get you back into the car. If the car is locked, we open it on site without damage, so you can reach the registration, the VIN plate and anything you need inside.
2. Line up the dealer order. We help you gather what the Mercedes-Benz dealer will ask for: the VIN, current registration or title, and photo ID in the owner's name. That avoids a second trip.
3. Keep the car where it is if possible. Ask the dealer whether the key can be programmed with the car in place or whether it needs to be towed in. Some brands deliver a pre-coded key; others must program it at the vehicle.
4. Plan for a spare. Once you have a working key, order a second one. Losing the only key on a dealer-only system is the slowest and most expensive situation to recover from.

Why the 2020 E-Class needs a dealer key

Some keys can't be made outside the factory network, and the 2020 E-Class is one of them. Mercedes-Benz generates the key data on its own servers and ties it to the car's VIN, so a new key is either pre-coded before it ships or programmed at the vehicle with an online session that only authorized dealer equipment can open. Aftermarket tools that handle older Mercedes-Benz models can't complete that handshake on this generation, at least not reliably today. That is a security feature: it is the reason relay and key-cloning thefts are harder on cars like this.

What to bring to the dealer

Bring the vehicle registration or title in your name, a matching government photo ID, and the VIN (on the lower driver's side of the windshield and on the door-jamb label). If the car is financed or leased, the dealer may also ask for the lender's paperwork, so call ahead and ask exactly what they need. If any key still works, bring it; adding a key is usually faster than replacing every key.

While you wait for the new key

While the dealer key is on order, protect what you have. If one key still works, keep it indoors and away from the car, and don't hand it to anyone you wouldn't trust with the car itself. If the car is locked with belongings inside, we can open it without damage. If the key has a mechanical emergency blade, ask us about cutting a spare blade by code so you can at least lock and unlock the doors.

What affects the dealer's price for an E-Class key

Expect the dealer's quote to include the key itself, a programming or setup charge, and sometimes a separate charge for cutting an emergency blade. If every key is lost, add the cost of getting the car to the dealership. Comparing two dealers is worth a phone call; programming charges vary more than the price of the key.

Avoid doing this twice

Once you have a working key for your 2020 E-Class, order a second one while the car's information is already on file. On dealer-only systems, adding a key while one still works is simpler, faster and cheaper than replacing every key after a loss. Keep the spare somewhere you can reach quickly, not in the car, and note where you stored it.

E-Class key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare replacement at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

Common Mercedes-Benz key problems

• Mercedes keys are written to one car, so a secondhand fob bought online usually can't be programmed to yours. New keys made for your car, or keys ordered by VIN through a dealer, are the options that work.
• Inland Empire summer heat shortens coin-cell life and is hard on fobs left on a sunny dashboard. If a Mercedes key starts responding only at close range, a new battery is the simplest first step.
• Every Mercedes smart key hides a mechanical emergency key that slides out of the fob. Many owners never notice it until the fob or the car's 12-volt battery dies and the driver's door has to be opened by hand.
• On dash-slot Mercedes models from the mid-2000s to the mid-2010s, a key that slides in but won't turn often points to a worn electronic ignition switch or a weak car battery rather than a bad key. We test both before replacing anything.
• A weak 12-volt battery can make a Mercedes act as if it has a key problem: the fob isn't recognized, the ignition won't turn, or the doors won't respond. Checking voltage first can save an unnecessary key order.

Tips from a mobile locksmith

• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.
• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.

Proof of ownership

Before we cut or program a key for any vehicle, we verify that you have the right to it. Please have two things ready: the current registration or the title, and a government-issued photo ID with a matching name. We also check that the VIN on those documents matches the VIN plate on the dashboard. If the registration is locked inside the car, that's fine; we open the vehicle first, check the paperwork in the glove box, and only then make the key. If something doesn't line up, we stop and sort it out before any key is made.

Need a 2020 Mercedes-Benz E-Class key?

Call Julian's Locksmith at (951) 903-3193 if you're locked out of a 2020 Mercedes-Benz E-Class or need help preparing a dealer key order. We'll tell you plainly what we can do on site and what has to go through Mercedes-Benz.