2016 Mercedes-Benz B-Class Key Replacement

2016 B-Class key specs

Most of these cars use a fob that slides into an ignition slot on the dash and turns like a key, which switches the car to its ready-to-drive state rather than starting an engine. Cars with Keyless-Go have a start button in that slot and open with a touch of the handle; the button pulls out so the fob can go in. The fob carries lock, unlock, hatch and panic buttons and hides a mechanical emergency key.

What's specific to the 2016 B-Class

The 2016 Mercedes-Benz B-Class is the third of 4 model years in the B-Class W242 (B-Class Electric Drive / B250e) (2014–2017), so it shares its key system with the rest of that run, which makes replacement parts easy to source. At roughly 10 years old, a 2016 Mercedes-Benz B-Class has usually seen real wear. Ignition and door cylinders on high-mileage cars wear along with the key, so we cut new keys to factory code rather than copying a worn key. Fob cases crack, buttons wear through and solder joints loosen at this age, so a new shell or a replacement remote often beats repairing the old one. Many have changed hands more than once, so erasing keys you can't account for is worth doing during the visit.

Smart-key cars like the 2016 B-Class can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2016 Mercedes-Benz B-Class

• Remote head key. A remote-head key puts two separate systems in one piece: a cut blade with a transponder chip that the immobilizer reads, and a small circuit board with buttons that signals the body control module to work the door locks. On a 2016 Mercedes-Benz B-Class with this style of key, each side is programmed separately. That explains some confusing failures. If the remote stops working but the car still starts, the problem is usually the battery or the remote board. If the buttons work but the engine won't run, look at the chip side. Knowing which half failed tells us whether you need a repair, a reprogram or a whole new key.
• Smart proximity key (push-to-start). Making a new smart key is mostly a programming job. The fob has to match the vehicle's FCC ID, frequency and chip, and then the keyless system must be told to accept it, normally through the OBD-II port. Depending on the platform, that can mean entering a PIN, waiting through a timed security procedure, or on some newer vehicles, using manufacturer online access. When every key is lost, certain models need a module removed and read on the bench. For your Mercedes-Benz B-Class W242 (B-Class Electric Drive / B250e), we'll tell you which of those applies, and if a step is dealer-only, you'll hear it before we drive out. The emergency blade hidden inside the fob is cut by code during the same visit.

How the Mercedes-Benz immobilizer works on the B-Class

Mercedes-Benz calls its immobilizer the Drive Authorization System, and for key work it helps to sort the cars into three eras. The oldest models we cover, such as the 2000-2002 E-Class, the last W202 C-Class and the first CLK, use a key with remote buttons in its head and an HU64 two-track blade that turns a conventional ignition lock while the immobilizer checks electronics inside the key. The next era, known in the trade as FBS3 or DAS 3, came to the US on the S-Class and CL around 2000 and spread to nearly every model within a few years. Its key is a fob that plugs into an electronic ignition switch and identifies itself by infrared: chrome-bodied at first, then the familiar black fob with chrome sides. Keyless-Go let many of these cars open and start with the fob left in a pocket. Around 2014 and 2015, Mercedes began moving models to FBS4, and push-button start gradually became standard. FBS4 keys are produced by Mercedes-Benz for one VIN, which is why most newer cars mean a dealer order.

• The B-Class Electric Drive was sold only in certain US states, so spare fobs and parts are scarcer than for most Mercedes models.
• Cars from the 2016 and 2017 model years wear B250e badges; earlier ones are badged B-Class Electric Drive.
• A separate 12-volt battery runs the locks and electronics, and when it runs down the fob can seem to fail.

Getting a 2016 B-Class key from the dealer

The B-Class Electric Drive belongs to the same Mercedes key family as the CLA and GLA of its time, and for most US cars the dependable source of a new key is Mercedes-Benz itself, ordered by VIN through a dealer. Aftermarket coverage depends on the exact control unit fitted, so we check the VIN before quoting. When a dealer key is the answer, we can still open the car, test the fob and its battery, and help with the paperwork.

Plan on a dealer-ordered key for most cars; we confirm by VIN and handle lockouts and fob checks.

How we help when the key must come from Mercedes-Benz

With every key gone, the era matters again. On many FBS3 cars, we remove the electronic ignition switch, read it on the bench and calculate a new key from the car's own data, with no working key to copy. That takes longer than making a spare, and a few switches or control units won't cooperate, but it often saves a tow to the dealer. For FBS4 cars and for the oldest pre-FBS3 models, the dependable route is a key built by Mercedes-Benz for your VIN and ordered through a dealer after you show ID and proof of ownership. While that order is filled, we can open the car without damage so you can reach documents or belongings, and a dealer can block the lost keys so they no longer start the car.

1. Get you back into the car. If the car is locked, we open it on site without damage, so you can reach the registration, the VIN plate and anything you need inside.
2. Line up the dealer order. We help you gather what the Mercedes-Benz dealer will ask for: the VIN, current registration or title, and photo ID in the owner's name. That avoids a second trip.
3. Keep the car where it is if possible. Ask the dealer whether the key can be programmed with the car in place or whether it needs to be towed in. Some brands deliver a pre-coded key; others must program it at the vehicle.
4. Plan for a spare. Once you have a working key, order a second one. Losing the only key on a dealer-only system is the slowest and most expensive situation to recover from.

Why the 2016 B-Class needs a dealer key

On the 2016 B-Class, the immobilizer and the keyless system trust only keys that Mercedes-Benz's own system has authorized for that VIN. Programming happens through a secure online connection, and the key itself is usually ordered with the car's security data already written to it. Independent locksmith equipment is very capable on most vehicles, but on dealer-only generations like this one the honest answer is that the factory has to be involved. Being upfront about that saves you the cost of a wasted service call.

What to bring to the dealer

Before you call the dealer, collect three things: proof of ownership (registration or title), photo ID with the same name, and the 17-character VIN. Write down which keys you still have and whether any of them still start the car. That one detail changes the order, the price and whether the car has to be at the dealership for programming.

While you wait for the new key

Waiting on a factory key can take anywhere from the same day to a week or more, depending on stock. In the meantime, avoid buying a used key online; on dealer-only systems a used key almost never programs to a different car. If you're locked out of the car or need something from inside it, call us; that part is quick and doesn't depend on the dealer.

What affects the dealer's price for a B-Class key

Expect the dealer's quote to include the key itself, a programming or setup charge, and sometimes a separate charge for cutting an emergency blade. If every key is lost, add the cost of getting the car to the dealership. Comparing two dealers is worth a phone call; programming charges vary more than the price of the key.

Avoid doing this twice

Once you have a working key for your 2016 B-Class, order a second one while the car's information is already on file. On dealer-only systems, adding a key while one still works is simpler, faster and cheaper than replacing every key after a loss. Keep the spare somewhere you can reach quickly, not in the car, and note where you stored it.

B-Class key battery

If a new replacement doesn't bring the fob back, the battery wasn't the problem. Common culprits include a battery holder whose solder joints have cracked from drops, contacts corroded by moisture, worn rubber button pads that no longer reach the circuit, or a board damaged by water. We can test whether the fob is transmitting at all and inspect the board closely. Sometimes a new shell or a resoldered holder solves it; sometimes the fob has to be replaced and programmed. Meanwhile, the car can usually still be started with the fob held at the backup spot described in the owner's manual.

Common Mercedes-Benz key problems

• Mercedes keys are written to one car, so a secondhand fob bought online usually can't be programmed to yours. New keys made for your car, or keys ordered by VIN through a dealer, are the options that work.
• Every Mercedes smart key hides a mechanical emergency key that slides out of the fob. Many owners never notice it until the fob or the car's 12-volt battery dies and the driver's door has to be opened by hand.
• Inland Empire summer heat shortens coin-cell life and is hard on fobs left on a sunny dashboard. If a Mercedes key starts responding only at close range, a new battery is the simplest first step.
• The black Mercedes fob with chrome sides takes a CR2025 coin cell, and a small lamp on the fob flashes when you press a button. If the lamp stays dark or the remote stops working, try a fresh cell before ordering a key.
• A weak 12-volt battery can make a Mercedes act as if it has a key problem: the fob isn't recognized, the ignition won't turn, or the doors won't respond. Checking voltage first can save an unnecessary key order.

Tips from a mobile locksmith

• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.
• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2016 Mercedes-Benz B-Class key?

Call Julian's Locksmith at (951) 903-3193 if you're locked out of a 2016 Mercedes-Benz B-Class or need help preparing a dealer key order. We'll tell you plainly what we can do on site and what has to go through Mercedes-Benz.