2019 Lincoln MKC Key Replacement

2019 MKC key specs

Every MKC starts with a button and uses an NXP Hitag Pro smart key. Catalogs list 2015-2016 cars with fobs under FCC ID M3N-A2C31243300 and 2017-2019 cars with the M3N-A2C940780 fob, which takes a CR2450 battery. Each fob hides an HU101 emergency blade, catalogued as Ford part 164-R7992 for early cars and 164-R8170 for later ones. Because the fob changed mid-run, we match yours by VIN or by the part number on your old fob.

What's specific to the 2019 MKC

2019 was the final model year of the MKC First generation. Late-run cars occasionally pick up running changes, so we check the VIN instead of assuming a 2019 Lincoln MKC matches a 2015. A 2019 Lincoln MKC is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Smart-key cars like the 2019 MKC can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2019 Lincoln MKC

• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2019 Lincoln MKC is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.

How the Lincoln immobilizer works on the MKC

Every Lincoln from the 2000 model year on uses Ford's Passive Anti-Theft System, PATS, which Ford also markets as SecuriLock. A transponder in the key head, or inside the fob on push-button cars, answers a challenge from the car, and the engine won't run unless that code matches a key stored in memory. The hardware changed in clear steps. The Town Car, Continental and Navigator through 2002, plus the 2002 Blackwood, use a Texas 4C fixed-code chip in a Ford 8-cut key. The 2000-2002 LS used a Texas 4D60 chip, and from 2003 the line moved to Texas 4D63 keys. Remote-head keys, with the lock buttons molded into the key, show up from the 2006 Zephyr on. Intelligent Access with push-button start arrived on the 2009 MKS, using 315 MHz fobs with a Philips ID46 chip and a hidden emergency blade. The 2013 MKZ introduced 902 MHz fobs with NXP Hitag Pro encryption and an HU101 emergency blade, while the MKX, MKS, MKT and Navigator kept the older 315 MHz style for several more years. The 2020 Aviator and Corsair added Phone As A Key, which lets a paired smartphone act as the key.

• The 2017-2019 MKC fob is catalogued as shared with the Continental and MKZ of the same years.
• MKC fobs are catalogued on 902 MHz, unlike the 315 MHz fobs of the MKT of the same period.

Programming a 2019 MKC key

Fobs are registered through the OBD-II port after Ford's security access step, and the HU101 emergency blade is cut to code. A spare is straightforward when one fob still works. With every fob lost, programmers generally need an emulator or bypass cable on this platform, so we confirm coverage by VIN before promising a same-visit result.

Spare fobs are routine; all-keys-lost on these push-button crossovers generally needs an emulator or bypass cable, which we confirm by VIN first.

Lost every key to your MKC?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Lincoln MKC requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your MKC and your schedule.

MKC key battery

Battery details for the 2019 MKC: CR2450 (2017-2019 fob). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Identify the exact key your MKC uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Lincoln system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an MKC key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Lincoln MKC is the most involved of all, both in the part itself and in the programming.
• Programming complexity and security access. Some immobilizers accept a new key with a few on-board steps. Others need a PIN code, a timed security wait, manufacturer online access, or removing a module to read its data. Every extra layer of security on the Lincoln system adds equipment time and labor to the job.
• Blade style and cutting. Traditional edge-cut blades are quick to cut. High-security laser-cut blades, with a groove milled into the side, need a specialized machine and more care, and the blanks themselves cost more. If we have to decode a lock to find the cuts, that adds labor as well.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Lincoln key problems

• Remote-head keys from roughly 2006 to 2014 crack at the blade root or wear through the button pads. The transponder and remote board can often move into a new shell, but the new blade still has to be cut to your car.
• Many Lincolns carry a SecuriCode keypad on the driver's door or B-pillar. If the wallet card with the five-digit factory code is gone, the code can usually be read with a scan tool, and you can then add a personal code.
• A rapidly flashing theft light with a no-start, or an engine that dies right away, usually means PATS didn't read the key. A cracked key head with a loose chip, or a hardware-store copy without the right transponder, is the usual cause.

Tips from a mobile locksmith

• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2019 Lincoln MKC key?

Don't wait until the last key disappears. If your Lincoln MKC is down to one key, or the one you have is falling apart, call (951) 903-3193. We're a licensed California locksmith, license LCO7891, serving Southern California and the rest of the Inland Empire with mobile car key service every day from 6:30 a.m. to 11:30 p.m.