2022 Kia Telluride Key Replacement

2022 Telluride key specs

Early Tellurides use a four-button smart key, FCC ID TQ8-FOB-4F24 (part 95440-S9000), or a five-button version with remote start, TQ8-FOB-4F34 (95440-S9200, then S9330 for 2022). These run on a CR2032. During 2022, a new fob under FCC ID TQ8-FOB-4F71 appears in supplier listings, with a Philips ID47 chip and the thicker CR2450 battery, so a 2022 truck can have either style. Each fob holds a KK12 emergency blade for the driver's door.

What's specific to the 2022 Telluride

2022 was the final model year of the Telluride ON (first generation), before the ON facelift arrived for 2023. Late-run cars occasionally pick up running changes, so we check the VIN instead of assuming a 2022 Kia Telluride matches a 2020. A 2022 Kia Telluride is about 4 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Smart-key cars like the 2022 Telluride can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2022 Kia Telluride

• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2022 Kia Telluride is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.

How the Kia immobilizer works on the Telluride

Kia keys sold in the US fall into three rough groups, and which group your car belongs to matters more than its age. The first is the upscale models that always had a transponder. The 2004-2006 Amanti used a Texas 4D60 chip, the 2007-2009 Amanti a Philips ID46, and the Borrego, Cadenza and K900 carried chipped keys or smart keys from the start. The second group is the large number of turn-key Kias, from many economy cars of the 2000s through the 2011 to 2021 model years, that have no engine immobilizer at all, including base versions of the Forte, Optima, Rio, Sedona, Sorento, Soul and Sportage. A correctly cut blade starts those cars, which made them theft targets and is why Kia now offers a free anti-theft software upgrade. The third group is push-button cars, where the car has to recognize the smart key before it will start. Those fobs moved from 315 MHz to 433 MHz in the mid-2010s and later to Hitag AES encryption, and several of the newest fobs take a thicker CR2450 battery. Current EV6 and EV9 models also offer Kia Digital Key 2.0 on a phone.

• Every Telluride has push-button start, so there's no turn-key version and no anti-theft campaign concern.
• Five-button fobs add remote start, which works only on trucks equipped for it from the factory.
• The battery type identifies the fob family: CR2032 in the 4F24 and 4F34 fobs, CR2450 in the later 4F71 fob.

Programming a 2022 Telluride key

Telluride fobs are registered through the OBD-II port with the PIN tied to the VIN, and registration overwrites the stored fobs, so bring every one you want to keep. When all keys are lost, we open the truck, register new fobs on site and cut the emergency blade by code or by decoding the door lock. We check your VIN first so the correct fob, with or without remote start, is on hand.

Lost every key to your Telluride?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Kia Telluride can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your Telluride and your schedule.

Telluride key battery

Battery details for the 2022 Telluride: CR2032 (4F24 and 4F34 fobs); CR2450 (4F71 fob). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Identify the exact key your Telluride uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Kia Telluride keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Kia system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of a Telluride key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your Telluride came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• Factory or aftermarket parts. Some owners want an exact factory match; others just want a dependable key that starts the car. Both are reasonable choices. The part you pick changes the quote, so we lay out the options side by side, with the trade-offs in fit, button feel and long-term durability, before you decide.
• Blade style and cutting. Traditional edge-cut blades are quick to cut. High-security laser-cut blades, with a groove milled into the side, need a specialized machine and more care, and the blanks themselves cost more. If we have to decode a lock to find the cuts, that adds labor as well.
• Travel, timing and extra repairs. Sometimes a key problem is really a lock problem: an ignition that won't turn even with the right key, or a door cylinder that has been jammed for years. Fixing those is separate work. We point them out, explain the options, and quote the whole job up front so the bill holds no surprises.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Kia key problems

• A smart key with a weak battery often triggers a key-not-detected message. Kia's manuals tell you to press the START/STOP button with the fob itself, which lets the car read the chip at close range, and then to replace the coin cell soon.
• On cars that have had Kia's anti-theft upgrade, locking with the remote arms an ignition kill that the remote's unlock button clears. Opening the door with the metal blade instead can set off the alarm, so keep a working remote with every key.
• Programming a new Kia key usually erases any key that isn't in the car at the time. If you add a spare and leave your other key at home, that key may stop starting the car, so bring every key and fob to the appointment.

Tips from a mobile locksmith

• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.
• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.
• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.

Need a 2022 Kia Telluride key?

Need a key for your 2022 Kia Telluride? Call Julian's Locksmith at (951) 903-3193 with your VIN and tell us which keys you still have. We'll confirm what the job involves, give you a quote before any work starts, and come to you in Southern California with everything needed to cut and program the key on the spot.