2019 Kia Soul EV Key Replacement

2019 Soul EV key specs

Every Soul EV starts with a four-button smart key and a START button. Supplier listings show FCC ID CQOFN00100 with part 95440-E4000 for the electric Soul, and a Texas 8A chip, while the gasoline Soul uses different part numbers under the same FCC ID, so a gas-car fob isn't the right part. The fob runs on a CR2032 and hides an emergency key on the HY20 (LXP90) profile for the driver's door.

What's specific to the 2019 Soul EV

2019 was the final model year of the Soul EV PS (first generation). Late-run cars occasionally pick up running changes, so we check the VIN instead of assuming a 2019 Kia Soul EV matches a 2015.

A 2019 Kia Soul EV is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2019 Kia Soul EV

• Smart proximity key (push-to-start). Making a new smart key is mostly a programming job. The fob has to match the vehicle's FCC ID, frequency and chip, and then the keyless system must be told to accept it, normally through the OBD-II port. Depending on the platform, that can mean entering a PIN, waiting through a timed security procedure, or on some newer vehicles, using manufacturer online access. When every key is lost, certain models need a module removed and read on the bench. For your Kia Soul EV PS (first generation), we'll tell you which of those applies, and if a step is dealer-only, you'll hear it before we drive out. The emergency blade hidden inside the fob is cut by code during the same visit.

How the Kia immobilizer works on the Soul EV

Kia keys sold in the US fall into three rough groups, and which group your car belongs to matters more than its age. The first is the upscale models that always had a transponder. The 2004-2006 Amanti used a Texas 4D60 chip, the 2007-2009 Amanti a Philips ID46, and the Borrego, Cadenza and K900 carried chipped keys or smart keys from the start. The second group is the large number of turn-key Kias, from many economy cars of the 2000s through the 2011 to 2021 model years, that have no engine immobilizer at all, including base versions of the Forte, Optima, Rio, Sedona, Sorento, Soul and Sportage. A correctly cut blade starts those cars, which made them theft targets and is why Kia now offers a free anti-theft software upgrade. The third group is push-button cars, where the car has to recognize the smart key before it will start. Those fobs moved from 315 MHz to 433 MHz in the mid-2010s and later to Hitag AES encryption, and several of the newest fobs take a thicker CR2450 battery. Current EV6 and EV9 models also offer Kia Digital Key 2.0 on a phone.

• The electric Soul's smart key is part 95440-E4000, separate from the gasoline Soul's B2AA0 and B2200 numbers.
• Kia sold the Soul EV in the US for the 2015 through 2019 model years, starting in a few states with strong electric-car demand.

Programming a 2019 Soul EV key

Fobs are registered through the OBD-II port with the immobilizer PIN, using a programmer that supports Kia's 8A smart keys, and a new fob must be unused or professionally unlocked. Registration rewrites the key list, so bring every fob. The 12-volt battery has to be healthy during programming, even when the drive battery is full. With every fob lost, we open the car, register new fobs and cut the emergency blade by code or from the door lock.

Lost every key to your Soul EV?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Kia Soul EV can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Kia Soul EV requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Why a spare key pays for itself

• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• A spare turns a future all-keys-lost emergency into a simple add-a-key job. With one working key in hand, programming is quicker, and the chip or fob can often be paired without decoding locks or reading modules, which keeps the cost of a lost key far lower.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your Soul EV and your schedule.

Soul EV key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare CR2032 at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

How the job works

1. Identify the exact key your Soul EV uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Kia system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a Soul EV key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Kia Soul EV is the most involved of all, both in the part itself and in the programming.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. On some vehicles, losing the last key changes the programming entirely, from a quick add-key procedure to a full immobilizer reset or a module read on the bench. That extra labor shows up in the price, and it's the strongest argument for keeping a spare in the house.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Kia key problems

• On cars that have had Kia's anti-theft upgrade, locking with the remote arms an ignition kill that the remote's unlock button clears. Opening the door with the metal blade instead can set off the alarm, so keep a working remote with every key.
• Most Kia fobs and flip keys take a CR2032, but newer designs, including the 2022-and-later Telluride, the refreshed K5 and Sorento, the K4 and later Carnival fobs, use the thicker CR2450. Read the cell printed inside before buying a replacement.
• Kia sometimes builds one model year with two different remotes, split by trim or build date. The 2014 Cadenza fob changed part numbers in late January 2014, for example, so we match the FCC ID and part number instead of guessing.

Tips from a mobile locksmith

• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Every so often, use the mechanical blade in the driver's door lock. Cylinders that go years without a key can seize from dust and dried grease, and you won't find out until the day the fob dies and the blade is your only way in. A small shot of dry lubricant keeps the lock ready.

Proof of ownership

Before we cut or program a key for any vehicle, we verify that you have the right to it. Please have two things ready: the current registration or the title, and a government-issued photo ID with a matching name. We also check that the VIN on those documents matches the VIN plate on the dashboard. If the registration is locked inside the car, that's fine; we open the vehicle first, check the paperwork in the glove box, and only then make the key. If something doesn't line up, we stop and sort it out before any key is made.

Need a 2019 Kia Soul EV key?

Locked out, keyless, or just tired of a fob that only works half the time? Julian's Locksmith can help with your Soul EV in Southern California. Have your registration and photo ID ready, call (951) 903-3193, and we'll give you an honest answer about what we can do on-site and what it will cost before we head your way.