2006 Kia Sorento Key Replacement

2006 Sorento key specs

First-generation Sorentos use a conventional ignition key, and supplier catalogs list a plain, non-transponder HY12 blank for most US trucks of these years. Keyless entry is a separate remote: a three-button unit, FCC ID PLNBONTEC-T009, on 2003-2005 trucks, a four-button version with a hatch button, PLNBONTEC-T016, through 2006, and a four-button remote, PLNHM-T011, on 2007-2009 trucks, shared with the Rondo. All take a CR2032. Canadian 2009 Sorentos are listed with chipped keys.

What's specific to the 2006 Sorento

The 2006 Kia Sorento is the fourth of 7 model years in the Sorento BL (first generation) (2003–2009), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2006 Kia Sorento is about 20 years old. Original keys are often worn smooth, and some factory remotes for cars this age are discontinued, so we may suggest a quality aftermarket remote or a separate fob.

Key options for the 2006 Kia Sorento

• Basic mechanical key. A plain mechanical key has no chip and no electronics, just a cut blade that lines up the wafers inside the lock. If your 2006 Kia Sorento uses one, replacement is mostly a cutting job, but how it's cut matters. Copying a worn key copies its wear, and a duplicate of a duplicate drifts further from spec each time. We prefer to cut by code: we look up or decode the factory bitting, then cut a fresh key to the original depths on a code machine. The result turns smoothly in the doors and ignition instead of needing a jiggle. If the ignition wafers themselves are already worn, we'll point that out too.
• Key with separate remote fob. Some Kia Sorento owners carry two pieces: a transponder key for the ignition and a separate remote fob on the same ring. Because they work independently, you only have to replace what's actually missing or broken. A lost remote still leaves you with a key that opens the doors and starts the engine, so it's an inconvenience rather than an emergency. A lost key is the more urgent half, since it has to be cut and its chip programmed before the car will run. We stock and program both sides, and if the whole ring is gone, we handle the key first and then pair a new remote.

How Sorento keys work on this generation

• Kia skipped the 2010 model year for the Sorento in the US, going straight from the 2009 truck to the 2011 redesign.
• The 2007-2009 four-button remote is the same part listed for the 2007-2010 Kia Rondo.
• Catalogs disagree on the blank for some late trucks, so we confirm with your key or lock before cutting.

Cutting a 2006 Sorento key

On a US Sorento without a transponder, a replacement key only has to be cut, from your key, the VIN key code or a decoded lock. Supplier listings mark these remotes as not programmable on board, so we pair them with a scan tool through the diagnostic connector and program all of your remotes together. If your truck turns out to have a chipped key, we register it through OBD-II with the immobilizer PIN instead.

Lost every key to your Sorento?

Because Kia programming is driven by a PIN tied to the VIN rather than by a working key, a car with no keys left is normally handled in one visit. On cars without an immobilizer, we cut a key to the factory code, which takes proof of ownership, or decode the driver's door lock, then pair a remote if your car uses one. On many newer Kias the driver's door holds the only exterior key cylinder, tucked under a cap on the handle. For transponder and smart-key cars, we get you in, register new keys or fobs over OBD-II and cut the emergency blade. Coverage is thinner for the newest Hitag AES fobs, the EV6 and EV9, and rare cars like the K900, so we check your VIN before driving out and tell you plainly if the dealer is the better route. Expect to show ID and registration first.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Why a spare key pays for itself

• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.

Dealer or mobile locksmith?

The biggest difference between a dealership and a mobile locksmith is where the work happens. A dealer programs keys in its service bay, so if every key is lost, the car usually has to be towed there, and you work around the service department's schedule and the time it takes to order a key by VIN. Julian's Locksmith brings the cutting machine, key blanks and programming equipment to the car, whether it sits in your driveway, a workplace lot or a parking structure. For a 2006 Kia Sorento we can program on-site, that means no tow and no shuttle rides back and forth. The trade-off is real, though: on vehicles where only the dealer can program keys, a tow or appointment may still be necessary, and we'll say so before you spend anything on our visit.

Sorento key battery

Battery details for the 2006 Sorento: CR2032 (remote). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
2. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Kia keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
3. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of a Sorento key

• Factory or aftermarket parts. Some owners want an exact factory match; others just want a dependable key that starts the car. Both are reasonable choices. The part you pick changes the quote, so we lay out the options side by side, with the trade-offs in fit, button feel and long-term durability, before you decide.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Kia key problems

• A smart key with a weak battery often triggers a key-not-detected message. Kia's manuals tell you to press the START/STOP button with the fob itself, which lets the car read the chip at close range, and then to replace the coin cell soon.
• Programming a new Kia key usually erases any key that isn't in the car at the time. If you add a spare and leave your other key at home, that key may stop starting the car, so bring every key and fob to the appointment.
• The exterior key lock on many newer Kias sits under a removable cap at the end of the driver's door handle. Practice once with the emergency blade, because a lock left unused for years can bind on the day you finally need it.
• Turn-key Kias without an immobilizer are frequent theft targets, and an attempted theft usually leaves the steering column torn open and the ignition cylinder ruined. We can fit a new cylinder keyed to your existing key, and Kia offers a free anti-theft software upgrade for eligible cars.

Tips from a mobile locksmith

• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2006 Kia Sorento key?

Don't wait until the last key disappears. If your Kia Sorento is down to one key, or the one you have is falling apart, call (951) 903-3193. We're a licensed California locksmith, license LCO7891, serving Southern California and the rest of the Inland Empire with mobile car key service every day from 6:30 a.m. to 11:30 p.m.