2019 Infiniti QX30 Key Replacement

2019 QX30 key specs

The QX30's smart key is a three-button fob (lock, unlock, panic), FCC ID IYZDC12K, part number 285E3-5DD3A, powered by a CR2025. It is built on Mercedes-Benz key architecture rather than Nissan's Intelligent Key, and its emergency key uses the Mercedes-style HU64 blade instead of the NSN14 profile found on other Infinitis. A replacement typically starts as a new key ordered for your VIN.

What's specific to the 2019 QX30

2019 was the final model year of the QX30 H15. Late-run cars occasionally pick up running changes, so we check the VIN instead of assuming a 2019 Infiniti QX30 matches a 2017.

A 2019 Infiniti QX30 is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2019 Infiniti QX30

• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2019 Infiniti QX30 is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.

How the Infiniti immobilizer works on the QX30

Nearly every Infiniti sold in the US since 2000 has an engine immobilizer built on Nissan's NATS (Nissan Anti-Theft System). A transponder in the key or fob has to answer the car's challenge before the engine is allowed to run, and the small security light on the dash blinks while the system is armed. The chip inside changed over the years. The 1997-2001 Q45 used a fixed-code Texas 4C transponder, while the G20, I30, I35 and QX4 used the Texas Crypto 4D60. From 2003 the G35, FX and later models moved to the Philips ID46, which stayed in the Intelligent Key fobs of many models well into the 2010s. Infiniti's Intelligent Key lets the car recognize a fob in your pocket; some early cars such as the FX paired it with a turning ignition knob, and push-button start became standard on most models by about 2009. From roughly 2013 the newer fobs use different electronics, and a replacement has to match both the FCC ID and the IC number printed on the original. The QX30 is the outlier: its key system came from Mercedes-Benz.

• Unlike every other Infiniti since 2000, the QX30 uses a Mercedes-Benz-derived key system and an HU64 emergency blade.
• The QX30 fob's FCC ID, IYZDC12K, is registered to Marquardt, a German key supplier, rather than to the suppliers behind other Infiniti fobs.

Getting a 2019 QX30 key from the dealer

New QX30 keys are typically ordered by VIN through the dealer and activated with factory-level software, since the Mercedes-based system does not accept the Nissan-style PIN programming used elsewhere in the lineup. We can open the vehicle, cut an HU64 emergency blade for the doors, and help you coordinate the dealer order with your proof of ownership in hand.

The Mercedes-derived key system generally requires a VIN-ordered key from the dealer; we handle lockouts, emergency blades and coordination.

How we help when the key must come from Infiniti

Losing every key to an Infiniti is often fixable on site without a tow, depending on the model. We verify ownership first, with your ID plus the registration or title, and then open the car without damage. The mechanical blade is cut by key code or decoded from a door lock; most Infinitis from 2000 into the 2020s use the same NSN14-style edge-cut profile (Ilco DA34), with a few older exceptions. On turn-key models that blade gets a transponder head and is programmed over OBD-II. On Intelligent Key models we register new fobs to the car and cut the emergency blade that hides inside each one. Several models are marked limited here because all-keys-lost can need extra procedures or a dealer PIN, and the QX30's Mercedes-based system is a dealer job. We tell you which case applies before any work starts.

1. Get you back into the car. If the car is locked, we open it on site without damage, so you can reach the registration, the VIN plate and anything you need inside.
2. Cut an emergency blade. Where the key has a mechanical emergency blade, we can cut one by code so you can lock and unlock the doors while the new key is on order.
3. Line up the dealer order. We help you gather what the Infiniti dealer will ask for: the VIN, current registration or title, and photo ID in the owner's name. That avoids a second trip.
4. Keep the car where it is if possible. Ask the dealer whether the key can be programmed with the car in place or whether it needs to be towed in. Some brands deliver a pre-coded key; others must program it at the vehicle.
5. Plan for a spare. Once you have a working key, order a second one. Losing the only key on a dealer-only system is the slowest and most expensive situation to recover from.

Why the 2019 QX30 needs a dealer key

On the 2019 QX30, the immobilizer and the keyless system trust only keys that Infiniti's own system has authorized for that VIN. Programming happens through a secure online connection, and the key itself is usually ordered with the car's security data already written to it. Independent locksmith equipment is very capable on most vehicles, but on dealer-only generations like this one the honest answer is that the factory has to be involved. Being upfront about that saves you the cost of a wasted service call.

What to bring to the dealer

Bring the vehicle registration or title in your name, a matching government photo ID, and the VIN (on the lower driver's side of the windshield and on the door-jamb label). If the car is financed or leased, the dealer may also ask for the lender's paperwork, so call ahead and ask exactly what they need. If any key still works, bring it; adding a key is usually faster than replacing every key.

While you wait for the new key

While the dealer key is on order, protect what you have. If one key still works, keep it indoors and away from the car, and don't hand it to anyone you wouldn't trust with the car itself. If the car is locked with belongings inside, we can open it without damage. If the key has a mechanical emergency blade, ask us about cutting a spare blade by code so you can at least lock and unlock the doors.

What affects the dealer's price for a QX30 key

Expect the dealer's quote to include the key itself, a programming or setup charge, and sometimes a separate charge for cutting an emergency blade. If every key is lost, add the cost of getting the car to the dealership. Comparing two dealers is worth a phone call; programming charges vary more than the price of the key.

Avoid doing this twice

Once you have a working key for your 2019 QX30, order a second one while the car's information is already on file. On dealer-only systems, adding a key while one still works is simpler, faster and cheaper than replacing every key after a loss. Keep the spare somewhere you can reach quickly, not in the car, and note where you stored it.

QX30 key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare CR2025 at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

Common Infiniti key problems

• Secondhand fobs bought online often fail. Newer smart keys lock to their first vehicle and must be unlocked, and a fob with the wrong FCC ID, IC number or part number will not register no matter how similar it looks.
• Programming wipes keys that are not present. Owners who add a spare without bringing every other key often find an old fob suddenly stops starting the car, so gather every key before the appointment.
• On older turn-key models like the I35, G35 and QX4, worn keys and ignition wafers cause sticking or no-turn ignitions. Cutting a fresh key by code, rather than copying a worn one, often solves it.
• Weak fob batteries are the most common cause of a key-not-detected warning on push-button Infinitis. Most fobs take a CR2032 or CR2025 coin cell, and a fresh battery often clears the warning without any reprogramming.
• A dead 12-volt battery can leave you outside a push-button Infiniti even with a good fob. The mechanical key hidden inside the fob opens the driver's door so you can reach the hood release.

Tips from a mobile locksmith

• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.

Need a 2019 Infiniti QX30 key?

Call Julian's Locksmith at (951) 903-3193 if you're locked out of a 2019 Infiniti QX30 or need help preparing a dealer key order. We'll tell you plainly what we can do on site and what has to go through Infiniti.