2019 Honda HR-V Key Replacement

2019 HR-V key specs

On a 2016-2022 HR-V, the trim decides the key. The LX has a turn-key ignition and a four-button remote head key (FCC MLBHLIK6-1T) with lock, unlock, hatch and panic, and a Honda G version of the ID47 chip in the head. EX, EX-L and Touring models use a smart key (FCC KR5V1X, part 72147-T7S-A01) that opens the doors when you touch the handle and starts the engine with the ENGINE START/STOP button. A metal blade slides out of the smart key for the door lock if its battery dies. The two styles can't be swapped between trims.

What's specific to the 2019 HR-V

The 2019 Honda HR-V is the fourth of 7 model years in the HR-V RU (first generation) (2016–2022), so it shares its key system with the rest of that run, which makes replacement parts easy to source. A 2019 Honda HR-V is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Smart-key cars like the 2019 HR-V can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2019 Honda HR-V

• Remote head key. Remote-head keys look similar across many vehicles, but the electronics inside are not interchangeable. Getting the right one for a Honda HR-V means matching the FCC ID and part number printed on the back or inside the case, the operating frequency, which is commonly 315 MHz on US-market cars, the transponder type, and the button layout. A trim with remote start or a power liftgate may use a four- or five-button version where a base trim uses three. We check those details against your VIN and your existing key, if you have one, before cutting the blade. A wrong match can look perfect and still refuse to program.
• Smart proximity key (push-to-start). A smart or proximity key lets a 2019 Honda HR-V open when you touch the door handle and start with a push of a button while the fob stays in your pocket or bag. Antennas in the doors and cabin send out a low-frequency wake-up signal; the fob answers on a higher radio frequency with an encrypted reply, and the car only allows a start once it confirms the fob is inside. When the fob battery is weak, that conversation fails, which is why most designs include a backup: hold the fob against the start button or set it in a designated pocket. The owner's manual shows where, and it's worth checking before you need it.

How the Honda immobilizer works on the HR-V

Honda's key systems changed in a few clear steps between 2000 and today, and the model year usually tells us which one your car has. In 2000 the Accord already carried a Megamos ID13 transponder in the key head, read by a coil around the ignition; the Civic followed for 2001 and the CR-V for 2002. Honda moved to Philips ID46 crypto transponders on the 2003 Accord and spread them across the lineup by about 2007, while the old edge-cut blade gave way to the laser-cut HON66 profile on most models. The same period brought remote-head keys, with lock and unlock buttons molded into the key itself. The 2013 Accord introduced Philips ID47 keys, often called Honda G keys, along with smart keys and push-button start on upper trims, and by the 2018 Accord every trim started with a button. Starting with the 2022 Civic, Honda began moving to AES-encrypted 4A fobs, now also used in the Accord and CR-V. On key-start Hondas, the key-shaped immobilizer light should go out a moment after you switch on; if it blinks, the car has not recognized the key.

• The LX remote head key, FCC MLBHLIK6-1T, is listed by suppliers for both the HR-V and the CR-V LX.
• The HR-V smart key, part 72147-T7S-A01, is also listed for later Fit EX and EX-L models.
• With a weak smart key battery, touching the fob's H logo to the ENGINE START/STOP button still lets the car read the chip.

Programming a 2019 HR-V key

Both key styles are registered through the OBD-II port with a professional programmer. Bring every key you still use, because on many Hondas a key that isn't present during registration can be dropped. The LX key's HON66 blade is cut on a laser-style machine, and the smart key's emergency blade is cut the same way. With all keys lost, we cut a blade from the door lock or key code, then register new keys to the immobilizer where the car is parked.

Lost every key to your HR-V?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. If the car is locked, we open it with non-destructive tools such as an inflatable wedge and a long-reach rod, or by picking the door lock. Some vehicles need a careful approach to avoid triggering the alarm, which can interfere with programming later.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Honda HR-V requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.

Dealer or mobile locksmith?

Dealers have one clear advantage: direct access to the manufacturer's own systems. Some newer vehicles tie key programming to online authorization that only a dealer can use, and certain all-keys-lost situations on specific platforms still require it. A good locksmith knows where those lines are. Where we can do the job, we use professional programming equipment that talks to the same immobilizer and keyless systems through the OBD-II port, and in many cases the result is identical: a properly registered key that starts the car. Where we can't, we can often still help by opening the vehicle, cutting a mechanical blade from code, or helping you gather what the dealer will ask for so that visit goes smoothly. For your Honda HR-V, ask us directly and you'll get a plain answer.

HR-V key battery

Battery details for the 2019 HR-V: CR1620 (LX remote head key); CR2032 (smart key). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Identify the exact key your HR-V uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Honda HR-V keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Honda system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of an HR-V key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your HR-V came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Blade style and cutting. Traditional edge-cut blades are quick to cut. High-security laser-cut blades, with a groove milled into the side, need a specialized machine and more care, and the blanks themselves cost more. If we have to decode a lock to find the cuts, that adds labor as well.
• Travel, timing and extra repairs. Sometimes a key problem is really a lock problem: an ignition that won't turn even with the right key, or a door cylinder that has been jammed for years. Fixing those is separate work. We point them out, explain the options, and quote the whole job up front so the bill holds no surprises.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Honda key problems

• If a Honda smart key battery dies, slide out the built-in key to open the driver's door. To start, press the brake and touch the H logo on the fob to the ENGINE START/STOP button while the button blinks.
• On several newer Hondas, including the 2018-and-later Accord, the driver's keyhole sits under a small cap on the door handle. The tip of the fob's emergency key pries the cap off, and it is easy to miss when you are locked out.
• High-mileage Hondas with laser-cut HON66 keys often develop worn ignition and door wafers, so the key must be jiggled to turn. A new key cut to factory code, not copied from the worn one, often turns cleanly; a badly worn cylinder needs repair.

Tips from a mobile locksmith

• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.

Need a 2019 Honda HR-V key?

Locked out, keyless, or just tired of a fob that only works half the time? Julian's Locksmith can help with your HR-V in Southern California. Have your registration and photo ID ready, call (951) 903-3193, and we'll give you an honest answer about what we can do on-site and what it will cost before we head your way.