2000 Honda Accord Key Replacement

2000 Accord key specs

Accords from 2000 to 2002 use a conventional Honda edge-cut key with a Megamos ID13 transponder sealed in its thick black plastic head, the same style found on other Hondas of the period. Keyless entry, where fitted, came as a separate four-button remote for lock, unlock, trunk and panic, and most factory units carry FCC ID KOBUTAH2T. Sedans and coupes, four-cylinder and V6, use the same key style. A plain metal copy will open the doors and trunk, but the engine will not run on it.

What's specific to the 2000 Accord

2000 was the first model year of the Accord Sixth generation (CG). Early-production cars sometimes use different part numbers than later ones, so for a 2000 Honda Accord we confirm the exact key from the VIN or the old key's FCC ID before cutting anything.

A 2000 Honda Accord is about 26 years old. Original keys are often worn smooth, and some factory remotes for cars this age are discontinued, so we may suggest a quality aftermarket remote or a separate fob. Because older immobilizers are simpler, all-keys-lost jobs on cars this age are usually more straightforward than on late models.

Key options for the 2000 Honda Accord

• Transponder (chip) key. There are two ways to give a new transponder key the right identity. Cloning reads the chip in a working key and writes that same ID onto a special cloneable chip, so the car can't tell the two apart. Programming adds a brand-new key ID to the immobilizer's memory through the OBD-II port, sometimes after entering a security PIN tied to the VIN. Cloning is handy when you have a working key and the chip family supports it. Programming is the better choice when keys are lost, because it also lets us remove keys you no longer control from the car's memory. For your Honda Accord, we'll explain which method fits and why.
• Key with separate remote fob. Some Honda Accord owners carry two pieces: a transponder key for the ignition and a separate remote fob on the same ring. Because they work independently, you only have to replace what's actually missing or broken. A lost remote still leaves you with a key that opens the doors and starts the engine, so it's an inconvenience rather than an emergency. A lost key is the more urgent half, since it has to be cut and its chip programmed before the car will run. We stock and program both sides, and if the whole ring is gone, we handle the key first and then pair a new remote.

How the Honda immobilizer works on the Accord

• The ID13 transponder in these keys is fixed-code, so it can be copied onto a cloneable chip without connecting to the car.
• The KOBUTAH2T four-button remote for these Accords is separate from the key and runs on a CR2032 coin cell.
• These cars use the older edge-cut Honda blade; the laser-cut HON66 keys of later Accords do not fit them.

Programming a 2000 Accord key

Because the ID13 is a fixed-code transponder, a spare can be cloned from a working key or registered to the car through the OBD-II port. With every key lost, we cut a key by code or by decoding a lock, then register new keys with our programmer. The separate remote pairs through Honda's on-board routine: switch the ignition on, press the remote's lock button within a few seconds, and repeat the cycle until the locks respond.

Lost every key to your Accord?

Losing every key to a Honda built between 2000 and about 2021 is usually handled where the car sits. We decode the driver's door lock to cut a working blade, connect through the OBD-II port, register new keys, and erase the lost ones so they can no longer start the car. A 2000 Civic or a 2000-2001 CR-V has no transponder at all, so a correctly cut key is the whole job. Smart-key Hondas need a new fob plus a cut emergency blade. The newest systems, on the 2022-and-later Civic and the 2023-and-later Accord and CR-V, depend on current tool coverage, and some cases still have to go through a Honda dealer; we tell you which applies before any work starts. Expect to show ID and proof of ownership first.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Honda Accord requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• A spare turns a future all-keys-lost emergency into a simple add-a-key job. With one working key in hand, programming is quicker, and the chip or fob can often be paired without decoding locks or reading modules, which keeps the cost of a lost key far lower.
• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.

Dealer or mobile locksmith?

Dealers have one clear advantage: direct access to the manufacturer's own systems. Some newer vehicles tie key programming to online authorization that only a dealer can use, and certain all-keys-lost situations on specific platforms still require it. A good locksmith knows where those lines are. Where we can do the job, we use professional programming equipment that talks to the same immobilizer and keyless systems through the OBD-II port, and in many cases the result is identical: a properly registered key that starts the car. Where we can't, we can often still help by opening the vehicle, cutting a mechanical blade from code, or helping you gather what the dealer will ask for so that visit goes smoothly. For your Honda Accord, ask us directly and you'll get a plain answer.

Accord key battery

Battery details for the 2000 Accord: CR2032 (separate remote). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Identify the exact key your Accord uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Honda Accord keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Honda keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Honda system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an Accord key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Honda Accord is the most involved of all, both in the part itself and in the programming.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Honda key problems

• A blinking key-shaped light with a no-start usually means the immobilizer did not read the chip. Honda warns that another transponder key or metal key chain near the ignition can interfere, and a chip lost from a cracked key head causes the same symptom.
• If a Honda smart key battery dies, slide out the built-in key to open the driver's door. To start, press the brake and touch the H logo on the fob to the ENGINE START/STOP button while the button blinks.
• High-mileage Hondas with laser-cut HON66 keys often develop worn ignition and door wafers, so the key must be jiggled to turn. A new key cut to factory code, not copied from the worn one, often turns cleanly; a badly worn cylinder needs repair.
• Remote-head keys, used from the 2003 Accord onward, tend to fail at the plastic: the key-ring loop snaps, the head splits, or the blade works loose. The circuit board and transponder can usually be moved into a new shell instead of buying a whole key.

Tips from a mobile locksmith

• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2000 Honda Accord key?

Locked out, keyless, or just tired of a fob that only works half the time? Julian's Locksmith can help with your Accord in Southern California. Have your registration and photo ID ready, call (951) 903-3193, and we'll give you an honest answer about what we can do on-site and what it will cost before we head your way.