2019 Fiat 500L Key Replacement

2019 500L key specs

The 2018 refresh brought revised bumpers, an updated cabin and a 7-inch Uconnect screen, but the key stayed familiar: a three-button flip remote on a SIP22 blade, still paired with the Marelli body computer, and the owner's manual still shows an ignition switch. Supplier listings mostly cover 2014 to 2017, so check the fob for FCC ID 2ADPXTRF198 before ordering a replacement, because remotes for the 500 and 500X look similar but are electronically different. A cut and programmed flip key is the whole job.

What's specific to the 2019 500L

The 2019 Fiat 500L is the second of 3 model years in the 500L First generation facelift (2018–2020), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2019 Fiat 500L is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2019 Fiat 500L

• Flip (switchblade) key. The hinge is the weak point on most flip keys. The pivot pin loosens, the spring loses tension, the release button sticks, and eventually the blade either won't lock open or flops out on its own. Carrying the key half-open in a pocket speeds that wear along. If the electronics are healthy, a replacement shell with a new hinge and pin often brings a 2019 Fiat 500L flip key back to crisp action: we transfer the board and chip, move or recut the blade, and test every function. If the board has broken solder joints or water corrosion, we'll show you the damage and quote a new key instead.

How the Fiat immobilizer works on the 500L

Fiat returned to the US for the 2012 model year, and every Fiat sold here since has a transponder immobilizer that must recognize the key before the engine will keep running. The Mexican-built 500 and 500c use a Philips ID46 (Hitag 2) chip in a three-button flip key, paired with a Delphi-type body computer. The Serbian-built 500L uses the same chip family but a Magneti Marelli-type body computer, so its remote is not interchangeable with the 500's. The Italian-built 500X steps up to AES encryption: a Megamos AES chip in the early flip key and Hitag AES in the push-button smart key, which is the only style Fiat's owner's manuals describe from 2017 on. The 124 Spider is the outlier, built by Mazda in Hiroshima with a Mazda-designed smart key running at 315 MHz. The first-generation 500e shares the 500's turn-key setup, while the 2024 and newer 500e uses a newer Stellantis keyless system. On the 500, 500L and 500X, the mechanical blade is the SIP22 laser-cut profile. When the chip isn't recognized, the blade can still turn the ignition, but the immobilizer will not let the engine run.

• The facelift reached US showrooms for the 2018 model year, along with a 7-inch Uconnect touchscreen and a color instrument display.
• The 2020 model year was the last for the 500L in North America.
• The flip remote still runs on a CR2032 coin cell, the same battery as earlier 500L keys.

Programming a 2019 500L key

Programming follows the same OBD-II and PIN path as earlier cars, but tool coverage for the newest 500L builds is less consistent than for 2014 to 2017. Some late cars may need the PIN requested through Fiat's online system after ownership is confirmed, or newer security steps before a tool can write keys. We check the VIN against current tool coverage before the visit, so you hear about any extra step on the phone rather than in your driveway.

Spare keys are routine. All-keys-lost coverage on 2018 to 2020 cars varies by VIN and tool version, which can add a step or a day.

Lost every key to your 500L?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. If the car is locked, we open it with non-destructive tools such as an inflatable wedge and a long-reach rod, or by picking the door lock. Some vehicles need a careful approach to avoid triggering the alarm, which can interfere with programming later.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Why a spare key pays for itself

• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your 500L and your schedule.

500L key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare CR2032 at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

How the job works

1. Identify the exact key your 500L uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Fiat system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a 500L key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Fiat 500L is the most involved of all, both in the part itself and in the programming.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. On some vehicles, losing the last key changes the programming entirely, from a quick add-key procedure to a full immobilizer reset or a module read on the bench. That extra labor shows up in the price, and it's the strongest argument for keeping a spare in the house.
• Programming complexity and security access. Some immobilizers accept a new key with a few on-board steps. Others need a PIN code, a timed security wait, manufacturer online access, or removing a module to read its data. Every extra layer of security on the Fiat system adds equipment time and labor to the job.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Fiat key problems

• Remote range fades as the CR2032 battery in a Fiat flip key ages, and the battery contacts in cheap replacement shells can lose tension. If a fresh battery doesn't help, the remote may need re-syncing or the board may be cracked.
• A key that turns but won't start the engine usually means the immobilizer doesn't recognize its transponder: a damaged chip, a key programmed to another car, or a spare that lost its pairing. Reprogramming fixes it; the ignition is rarely at fault.
• Driver's door lock cylinders on older Fiats can stiffen from years of disuse, since owners rarely touch them until the remote fails. Cleaning and lubricating the SIP22 cylinder now beats discovering it's seized during a lockout.

Tips from a mobile locksmith

• Every so often, use the mechanical blade in the driver's door lock. Cylinders that go years without a key can seize from dust and dried grease, and you won't find out until the day the fob dies and the blade is your only way in. A small shot of dry lubricant keeps the lock ready.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2019 Fiat 500L key?

Don't wait until the last key disappears. If your Fiat 500L is down to one key, or the one you have is falling apart, call (951) 903-3193. We're a licensed California locksmith, license LCO7891, serving Southern California and the rest of the Inland Empire with mobile car key service every day from 6:30 a.m. to 11:30 p.m.