2016 Fiat 500e Key Replacement

2016 500e key specs

The first 500e uses a flip key styled like the gas 500's, with lock, unlock and liftgate buttons, and a SIP22 blade that turns the ignition to switch on the electric drive system. The same remote also locks and unlocks the charge port door. Because far fewer 500e cars were built, replacement remotes are harder to source, and you shouldn't assume a part listed only for the gas 500 fits. Read the FCC ID printed inside your fob before ordering anything, or call with your VIN and let us confirm the correct part first.

What's specific to the 2016 500e

The 2016 Fiat 500e is the fourth of 7 model years in the 500e First generation (Mexico-built) (2013–2019), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

At roughly 10 years old, a 2016 Fiat 500e has usually seen real wear. Ignition and door cylinders on high-mileage cars wear along with the key, so we cut new keys to factory code rather than copying a worn key. Fob cases crack, buttons wear through and solder joints loosen at this age, so a new shell or a replacement remote often beats repairing the old one. Many have changed hands more than once, so erasing keys you can't account for is worth doing during the visit.

Key options for the 2016 Fiat 500e

• Flip (switchblade) key. A flip key folds its blade into the fob on a spring-loaded hinge and swings it out with the press of a button. Inside the body sit the transponder chip and the remote circuit board, which means the metal blade itself carries no electronics. That's good news when the blade snaps. On many flip keys for a Fiat 500e, we can cut a new blade to your key code and fit it into your existing fob, with no reprogramming required, because the chip and remote never left the housing. Many flip-key blades are laser-cut, with a groove milled along the side rather than notches on the edge, so they need a code machine built for that profile.

How the Fiat immobilizer works on the 500e

Fiat returned to the US for the 2012 model year, and every Fiat sold here since has a transponder immobilizer that must recognize the key before the engine will keep running. The Mexican-built 500 and 500c use a Philips ID46 (Hitag 2) chip in a three-button flip key, paired with a Delphi-type body computer. The Serbian-built 500L uses the same chip family but a Magneti Marelli-type body computer, so its remote is not interchangeable with the 500's. The Italian-built 500X steps up to AES encryption: a Megamos AES chip in the early flip key and Hitag AES in the push-button smart key, which is the only style Fiat's owner's manuals describe from 2017 on. The 124 Spider is the outlier, built by Mazda in Hiroshima with a Mazda-designed smart key running at 315 MHz. The first-generation 500e shares the 500's turn-key setup, while the 2024 and newer 500e uses a newer Stellantis keyless system. On the 500, 500L and 500X, the mechanical blade is the SIP22 laser-cut profile. When the chip isn't recognized, the blade can still turn the ignition, but the immobilizer will not let the engine run.

• Fiat assembled the first 500e in Toluca, Mexico, from late 2012 until mid-2019.
• Fiat sold the first 500e only in a limited number of states, mostly California, rather than nationwide.
• The key fob's lock and unlock buttons also operate the charge port door, according to the owner's manual.
• A weak 12-volt battery can make a healthy 500e key seem dead, so test it before replacing the key.

Programming a 2016 500e key

Key programming runs through the OBD-II port with Fiat immobilizer software and the security PIN, much like the gas 500. The electric drivetrain adds modules the gas car doesn't have, so we confirm tool coverage for the exact VIN first. We also keep the 12-volt battery supported during the session, because a sagging 12-volt supply is a common reason programming fails on electric cars.

Spare keys are usually possible. With low production numbers, remote availability and all-keys-lost coverage vary by VIN, so we confirm before quoting.

Lost every key to your 500e?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Fiat 500e requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Why a spare key pays for itself

• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your 500e and your schedule.

500e key battery

Most fobs for a 2016 Fiat 500e open along a small slot in the seam; a coin or a plastic pry tool works better than a screwdriver, which chews up the housing. If the fob hides a mechanical blade, slide it out first, since the case often opens from that gap. Note which side of the old cell faces up, swap in a fresh CR2032, and press the halves together until they click all the way around. Handle the new battery by its edges, because skin oil on the faces can hurt contact. In most cases the fob keeps its programming through a battery change, so test lock, unlock and start, and you're done.

How the job works

1. Identify the exact key your 500e uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Fiat keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Fiat system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a 500e key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your 500e came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• Programming complexity and security access. Two cars with similar-looking keys can program very differently. Newer platforms often guard key programming behind encrypted access or paid credentials, while older systems allow straightforward OBD-II pairing. We check the exact procedure for your VIN before quoting, so the number reflects the real work involved.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Fiat key problems

• Flip-key hinges on the 500 and 500L wear out over time. The blade stops locking open or swings loosely, often because the pivot pin has worked free. A new shell with the original circuit board moved over usually fixes it.
• Inexpensive online Fiat flip keys often arrive locked or uncoded. Many must be pre-coded on a key programmer before the car will learn them, so a key that won't program is often the wrong blank rather than a fault in the car.
• Buying the wrong remote is a frequent mistake. The 500 and 500c use Delphi-type remotes marked LTQF12AM433TX or 2ADFTF12AM433TX, while the 500L uses the Marelli-type 2ADPXTRF198. The blades match, but the buttons only work on the right car.

Tips from a mobile locksmith

• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.
• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2016 Fiat 500e key?

Locked out, keyless, or just tired of a fob that only works half the time? Julian's Locksmith can help with your 500e in Southern California. Have your registration and photo ID ready, call (951) 903-3193, and we'll give you an honest answer about what we can do on-site and what it will cost before we head your way.