Automotive locksmith
2025 Audi S4 Key Replacement
Short answer: The 2025 Audi S4 belongs to the S4 B9 (Typ 8W) and uses a smart proximity key with push-button start. We can usually add spare keys on site; some situations, such as all keys lost on certain trims, need extra steps or a dealer-supplied part. Julian's Locksmith cuts and programs S4 keys on site; call (951) 903-3193 with your VIN for a quote.

Keys tend to vanish far from home: a gym locker, a freeway rest stop, a jobsite across the Inland Empire. When the vehicle is a 2025 Audi S4 and no spare is within reach, the practical fix is a locksmith who comes to the car. Julian's Locksmith serves Southern California from our base in San Bernardino with a mobile van set up for automotive key work. Tell us where the car is parked and what kind of key it used, and we'll give you an honest ETA and a quote. Once we're there and ownership is confirmed, we make the key from the car itself, using the VIN, lock decoding, or both, and program it before you drive off.
2025 S4 key specs
| Generation | B9 (Typ 8W), 2018–2025 |
|---|---|
| Ignition | Push-button start |
| Key types | Smart proximity key (push-to-start) |
| Locksmith support | Spares yes; some cases need extra steps |
B9 S4 sedans use push-button start and the MLB Evo fob shared with the A4. The fob needs to be in the cabin to start, and advanced key, where fitted, adds hands-free door unlocking. Part numbers vary with build date, so match your existing fob's label or your VIN. An emergency blade slides out of the fob for the driver's door, and European fobs on a different frequency won't work the buttons.
What's specific to the 2025 S4
2025 was the final model year of the S4 B9 (Typ 8W). Late-run cars occasionally pick up running changes, so we check the VIN instead of assuming a 2025 Audi S4 matches a 2018.
At 1 year old, a 2025 Audi S4 is usually still on its original keys and fob batteries. The most common call for a car this new is a second key, since many buyers leave the dealer with only one, or a replacement after a lost fob.
Key options for the 2025 Audi S4
- Smart proximity key (push-to-start). A smart or proximity key lets a 2025 Audi S4 open when you touch the door handle and start with a push of a button while the fob stays in your pocket or bag. Antennas in the doors and cabin send out a low-frequency wake-up signal; the fob answers on a higher radio frequency with an encrypted reply, and the car only allows a start once it confirms the fob is inside. When the fob battery is weak, that conversation fails, which is why most designs include a backup: hold the fob against the start button or set it in a designated pocket. The owner's manual shows where, and it's worth checking before you need it.
How the Audi immobilizer works on the S4
Every Audi sold in the US from 2000 on has a transponder immobilizer, but the system behind it changed several times, and that history decides how a new key gets made. Through the mid-2000s, most models used a Megamos ID48 chip in an HU66 flip key, with the immobilizer data stored in the instrument cluster. The A6, Q7 and A8 that followed kept a flip key but added an entry-and-start module that has to be read during programming. Starting with the 2008 A5 and 2009 A4, the B8 family switched to a rectangular fob and moved immobilizer and keyless functions into a comfort control module known in the trade as BCM2; the C7 A6, first-generation A7 and D4 A8 use the same module family. Smaller MQB cars such as the 2015-2020 A3, the third-generation TT and the 2019-2025 Q3 go back to a cluster-based system. The 2017-and-later MLB Evo models protect their data far more heavily, and the newest Audis register keys through Audi's online system. US-market Audi remotes run on 315 MHz.
- There was no 2017 S4 in the US; the B9 version arrived for 2018.
- The 2025 model year was the S4's last in the US.
Programming a 2025 S4 key
The S4's MLB Evo immobilizer data is protected, so a spare requires specialized equipment, an online calculation step on many cars and a fob prepared for that VIN. We check coverage before quoting because it varies by build. When every key is lost, the dealer is often the realistic option, and we say so up front rather than starting a job that can't finish.
Some cars can get a spare with specialized equipment; all-keys-lost and newer builds increasingly need the dealer.
Lost every key to your S4?
- Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Audi S4 can be done on-site and bring the right key, so the first trip is the only trip.
- Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
- Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
- Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Audi S4 requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
- Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.
Why a spare key pays for itself
- Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
- A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
- Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
Dealer or mobile locksmith?
Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your S4 and your schedule.
S4 key battery
Most fobs for a 2025 Audi S4 open along a small slot in the seam; a coin or a plastic pry tool works better than a screwdriver, which chews up the housing. If the fob hides a mechanical blade, slide it out first, since the case often opens from that gap. Note which side of the old cell faces up, swap in a fresh replacement, and press the halves together until they click all the way around. Handle the new battery by its edges, because skin oil on the faces can hurt contact. In most cases the fob keeps its programming through a battery change, so test lock, unlock and start, and you're done.
How the job works
- Identify the exact key your S4 uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Audi S4 keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
- Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
- Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Audi keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
- Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
- Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your S4, you'll have heard that before we arrived, not halfway through the job.
- Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.
What affects the price of an S4 key
- The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your S4 came with different key styles by trim, the one your car actually uses is the one that sets the quote.
- Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
- Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.
- Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.
Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.
Common Audi key problems
- Used keys pulled from another Audi are usually locked to that car. Some comfort-module-era keys can be reset with special equipment, but many later keys cannot, so check with us before buying a used fob.
- Keys bought online are often European versions running on 433 or 868 MHz. Even if the chip can be programmed, the buttons will never work on a US Audi, because US models use 315 MHz remotes.
- Slot-start Audis, meaning B8-generation A4, A5 and Q5 models without advanced key, can develop a worn ignition slot that won't read or release the fob. That is an ignition switch repair, not a key problem.
Tips from a mobile locksmith
- If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
- Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.
- Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
Proof of ownership
Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.
Need a 2025 Audi S4 key?
Locked out, keyless, or just tired of a fob that only works half the time? Julian's Locksmith can help with your S4 in Southern California. Have your registration and photo ID ready, call (951) 903-3193, and we'll give you an honest answer about what we can do on-site and what it will cost before we head your way.
Frequently asked questions
Can a locksmith make a key for a 2025 Audi S4?
We can usually add spare keys on site; some situations, such as all keys lost on certain trims, need extra steps or a dealer-supplied part. Some cars can get a spare with specialized equipment; all-keys-lost and newer builds increasingly need the dealer. The 2025 S4 uses a smart proximity key with push-button start.
How long does it take to make a new Audi S4 key?
Adding a key to a car that already has a working one is usually a single short visit, often finished within an hour once we're on-site. All-keys-lost jobs take longer because we may need to open the car, decode a lock and run a longer programming routine. Some security systems also impose their own waiting periods during programming. We'll give you a realistic time estimate for your specific vehicle when you call.
Can you fix a broken Audi key instead of replacing it?
Often, yes. If the shell is cracked, the buttons are worn or the blade snapped, but the circuit board and chip are healthy, we can transfer the electronics into a new housing and cut a fresh blade to your key code. Your existing programming stays intact. If the board has been damaged by water or impact, a repair won't last, and we'll recommend a new programmed key instead.
When can you come out to Southern California for a car key?
We work every day from 6:30 a.m. to 11:30 p.m., weekends included. Weekends are included. Call (951) 903-3193 and we'll give you an honest ETA to Southern California based on where we are at the time. If you're stuck outside our hours, it's usually smarter to leave the car parked and locked, get home safely, and call when we open than to pay for an overnight tow.
What happens to the key I lost? Can it still start my Audi?
When we program new keys, we can usually erase lost keys from the immobilizer, which stops them from starting the engine. On some systems the car only remembers the keys present during programming, so the lost one drops off automatically. Keep in mind that a lost key's metal blade can still open the doors, so if it went missing with something that shows your address, ask about rekeying the door locks.
Can you make an S4 key from the VIN alone?
The VIN is a starting point, not a finished key. For many vehicles, the factory key code can be obtained from the VIN through manufacturer channels once ownership is verified, which lets us cut a blade that matches your locks. The chip or fob still has to be programmed at the vehicle, so we need access to the car itself. Where no code is available, we decode a lock instead.
Is the 2025 Audi S4 push-to-start?
Yes. The 2025 S4 uses push-button start with a smart proximity key, so a replacement has to be a programmed smart fob, not just a cut blade.
